Overview

 The BP410 is a rugged, light-weight, ergonomically designed beltback to be used with the BS410 base station. Single-channel operation allows any four beltpack and/or all-in-one wireless headset uses to engage in simultaneous, full-duplex communication. In dual-channel operation, three users may be in full-duplex with up to 13 additional users in listen-only mode. The BP410 has a rugged, over-mold, reinforced casing and long-lasting keypads with no mechanical switch. Using the BAT50 Li-Ion battery, the BP410 has up to 12 hours of battery life.

Features

• Two-channel
• 7kHz wideband audio
• Up to 15 beltpacks and/or all-in-one handsets on a single system
• Single or dual-channel operation
• Up to 12 hours of battery life

Specifications

Audio

• Channels: 2 audio channels
• Frequency Range: 2400 MHz - 2483.5 MHz
• Frequency Response: 200 Hz - 7 kHz
• Antenna: Internal, horizontal/vertical diversity
• Headset Connector: 4-pin, mini-DIN
• Microphone: Electret
• Headset Output: 160mW into 32 Ohms
• Communication Security: 64-bit encryption
• System Distortion: <2%
• Controls: Power, Volume-Up, Volume-Down, A, B, ISO
• Indicators: Dual-color LED (red/green)
• Battery Requirements: 3.6V lithium-ion
• Battery Life: Up to 12 hours
  
  

Antenna

• Internal, Horizontal/Vertical diversity
  
  

Transmitter

• Type: Frequency Hopping, Spread Spectrum (FHSS)
• Transmit Power: 100mW burst
• Modes: Momentary or Latch
• Type: Gaussian filtered FSK, TDMA
• Frequency Stability: 13 ppm
• Harmonics/Spurious: Exceeds FCC and ETSI specifications
  
  

Receiver

• Type: Frequency Hopping, Spread Spectrum (FHSS)
• RF Sensitivity: <-90dBm w 10-3 BER
• Frequency Stability: 13 ppm
• Distortion: <2%
  
  

Environmental

• 32°F to +122°F (0°C to +50°C)
• Dimensions: 2.25 x 4.5 x 1 in (57.2 x 114.3 x 25.4 mm) (HxWxD)
• Weight: 7.4 oz (0.21 kg) including battery and pouch