Overview
The WH410 is a light-weight, single ear, all in one wireless headset that works in conjunction with the BP410 which is a rough-and-tough, light weight, ergonomically crafted beltpack. Both the BP410 and the WH410 function in the license free 2.4GHz frequency range and are used in conjunction with the BS410 base station. Single channel functionality enables any four beltpack and/or all-in-one headset users to participate in simultaneous, full duplex communication. In dual channel operation, three users may be in full duplex with up to thirteen additional users in listen only mode. The BP410 and WH410 have built-to-last, reinforced exteriors and long lasting keypads with no mechanical switches. The WH410 has a lightweight, elegant design and wire-free steel headband for continuous comfort. The BP410 features an over mold beltpack case with a beltclip. Using the BAT50 Li-Ion battery, the BP410 and WH410 have up to 12 hours of battery life. The AC-50 charges up to 4 BAT50 batteries at a time and includes storage slots for 4 additional batteries. Charging time is 2.5 hours.
Features
- 2 Channels
- 2.4 GHz frequency range
- 7KHz wide band audio
- Up to 15 beltpacks and/or all-in-one headsets on a single system
- Single or double channel operation
- Up to 12 hours of battery life
Specifications
Audio
- Channels: 2 audio channels
- Frequency Range: 2400 MHz – 2483.5 MHz
- Frequency Response: 200 Hz – 7 KHz
- Antenna:Internal, horizontal/vertical diversity
- Headset Connector: 4-pin, mini-DIN
- Microphone: Electret
- Headset Output: 160mW into 32 Ohms
- Communication Security: 64-bit encryption
- System Distortion: <2%
- Controls: Power, Volume-Up, Volume-Down, A, B, ISO
- Indicators:Dual-color LED (red/green)
- Battery Requirements: 3.6V lithium-ion
- Battery Life: Up to 14 hours
Antenna
- WH410: Internal
Transmitter
- Type:Frequency Hopping, Spread Spectrum (FHSS)
- Transmit Power: 100mW burst
- Modes: Momentary or Latch
- Type:Gaussian filtered FSK, TDMA
- Frequency Stability: 13 ppm
- Harmonics/Spurious: Exceeds FCC and ETSI specifications
Receiver
- Type:Frequency Hopping, Spread Spectrum (FHSS)
- RF Sensitivity: <-90dBm w 10-3 BER
- Frequency Stability: 13 ppm
- Distortion: <2%
Environmental
- 32°F to +122°F
- (0°C to +50°C)
Dimensions
- BP410: 1 x 4.5 x 2.25 (25.4 x 114.3 x 57.2 mm) (DxWxH)
Weight
- WH410: 3.5 oz (0.10 kg) including battery