Overview

Two Channels in One
The DX410 features 2-wire and 4-wire bridging, allows the option for combining the 2-wire and 4-wire ports together on either channel A or B, allowing operators to use a 4-wire out to send all the audio to a mixer, matrix intercom or other audio source.

Easy and Fast Integrations
Interface with other Clear-Com or third-party TW wired partyline systems easily, quickly and accurately with its 2-wire auto-nulling capability.

Clear audio quality
The 7Hz wideband audio offers an expanded audio range and increased intelligibility that enables even soft whispers to be heard clearly.

• 2-Channel 2.4GHz Base Station
• 2-channels of communications
• 2.4GHz license-free operation
• Supports up to 15 beltpacks in a single system
• 7kHz wideband audio
• 2-wire and 4-wire bridging on the same system
• 2-wire auto-nulling
• Lost packet concealment
• Simple to set up and configure

Specifications

Audio

• Channels: 2 audio channels
• Capacity: Up to 15 BP410 and/or WH410 per base station
• Full-Duplex: Yes. Single-channel = 4 in simultaneous full-duplex. Dual-channel = 3 in simultaneous full-duplex.
• Radio Frequency Range: 2400 – 2483.5 MHz
• Audio Frequency: 200 Hz – 7kHz
• 4-wire I/O: RJ45, 600 Ohms balanced, level adjustable, simultaneous operation with 2-wire
• 2-wire I/O: XLR-3M, XLR-3F, externally-switchable RTS or Clear-Com, 200 Ohms, level adjustable, null adjustable to 50dB attenuation, typical
• Aux Input: XLR-3F with ¼” (6.35mm) combo jack, 600 Ohms balanced, level adjustable
• Aux Output: XLR-3M, 600 Ohms balanced, level adjustable
• Headset Connector: 4-pin mini-DIN, Electret microphone
• Headset Output: 200mW into 32 Ohms
• Antenna Type: External ½-wave dipole (R-TNC connector), RX/TX horizontal/vertical diversity
• System Distortion: <2%
• Communication Security: dual-slot diversity

Transmitter

• Type: Frequency Hopping, Spread Spectrum (FHSS)
• Transmit Power: 100mW burst
• Modulation Type: Gaussian filtered FSK, TDMA
• Frequency Stability: 13 ppm
• Harmonics/Spurious: Exceeds FCC and ETSI specifications over temperature

Receiver

• Type: Frequency Hopping, Spread Spectrum (FHSS)
• RF Sensitivity: <-90dBm w 10-3 BER
• Frequency Stability: 13 ppm
• Distortion: <2%

Power Requirements

• 100 – 240 VAC, 50 – 60 Hz or 12 – 14 VDC

Environmental

• Temperature: +32°F – +122°F (0°C – +50°C)

Dimensions

• 1.75 x 19.0 x 17.13 in
• (44 x 483 x 435 mm) (HxWxD)

Weight

• 9 lbs (4.1 kg)