Clear-Com FSII-BASE-II-X5

Clear-Com FSII-BASE-II-X5

Clear-Com FSII-BASE-II-X5

Clear-Com FSII-BASE-II-X5

FreeSpeak II Base Station: (25) beltpacks*, 1RU

SKU: CLRCM-FSII-BASE-II-X5
MSRP: $11,910.00

Overview

The Clear-Com FSII-BASE-II-X5 FreeSpeak II-Base-II is a base station for the wireless FreeSpeak II 1.9GHz and 2.4GHz active transceiver and beltpacks with four 2-wire analog partyline connections, four 4-wire audio connections and four digital displays with soft keys. The base station can operate a mix of up to 25 1.9GHz and/or 2.4 GHz beltpacks on a single system.

  • Routing and configuration of up to 25 FSII beltpacks
  • Browser-based configuration tool
  • Four 2-wire ports with call signal, auto-nulling
  • Four 4-wire ports with call signal
  • One dry contact relays
  • Multi-mode user interface with monitoring, setup and main station modes with assignable soft keys

Specifications:

  • Base-to-Beltpack Frequency Response: 100Hz - 7.1kHz
  • No. of Beltpacks per Base Station: 25
  • No. of Transceiver/ Antennas Supported by Base: 10
  • No. of Active Transceiver Ports: 2, one port can remotely power up to 1 FSII splitter or 1 FSII transceiver
  • PC Programming Port: 2 LAN RJ45
  • Relay Port: DB15, supports one relay assigned to the SA out
  • Partyline A ,B,C,D (each): XLR-3F, on/off termination switch, Clear-Com and RTS compatible
  • Partyline Power On/Off: A/B, C/D paired
  • Partyline Output Voltage: 26 - 28VDC, 850mA per pair (A/B or C/D)
  • Four-Wire/Matrix Connection: 4 RJ-45
  • Program Input: XLR-3F, transformer isolated, line-level input
  • Stage Announce Output: XLR-3M, transformer isolated, line-level output
  • Front Panel Headset: 4-pin male and 5-pin female options
  • Front Panel Displays: 4 OLED’s with encoders and assignable soft keys
  • Front Panel Indicators: Antenna Status, Beltpack Status
  • External Power Supply Connection: 12VDC
  • Base Station Programming/Editing: Push-to-enter rotary encoder