Overview

Flexible Operations
Dual-frequency operation in one single base station maximizes intercom investment and provides flexible deployment options. Intelligently mix 1.9GHz and 2.4GHz system components for an expanded system.

Go Farther
Robust base station supports up to 25 full-duplex wireless beltpacks and covers a large production area with 10 transceivers and two transceiver splitters spanning up to 3,200 feet away from the base station.With the built-in fiber connection, each fiber transceiver module can further extend coverage to a maximum distance of 60,000 feet (or 20,000 meters) away from the base station via the SFP fiber slot.

More Versatility
The FreeSpeak II-Base-II offers three different modes: Base Station for digital signal transmission; a headset master station for operators to communicate with anyone wired or wireless on the system; and an intuitive menu user interface for configuring setup and making real-time system changes.

Expanded Connectivity Options
Four 2-wire ports and four 4-wire ports allow the base station to directly connect with industry-standard analog partyline and 4-wire audio devices, respectively, without the need of additional interfacing required.

• FreeSpeak II-Base-II Digital Wireless Base Station
• Supports both 1.9GHz and 2.4GHz FSII beltpacks on a single base station
• Routing and configuration of up to 25 FreeSpeak II beltpacks
• Four 2-wire ports with call signal, auto nulling (Clear-Com and RTS)
• Supports 2 transceivers natively and up to 10 transceivers via FSII splitter
• Fiber transceiver connections, supports two fiber-enables FSII splitters
• Multi-mode user interface has monitoring, setup and main station modes with assignable soft keys
• GPIOs allow assignment to trigger cue lights, tally or radios
• Matrix and partyline configurations support up to 12 channels and/or groups
• DECT Sync ports for optimizing co-located systems
• RF Audio Filter improves system performance in hard RF environments
• Browser-based Core Configuration Manger (CCM) with InSite for real-time statistics, beltpack and transceiver diagnostics, and functionality such as Remote Mic Kill
• Text messaging from CCM to wireless beltpacks

Specifications

• Base-to-Beltpack Frequency Response: 100Hz – 7.1kHz
• No. of Beltpacks per Base Station: 25
• No. of Transceiver/ Antennas Supported by Base: 10
• No. of Active Transceiver Ports: 2, one port can remotely power up to 1 FSII splitter or 1 FSII transceiver
• PC Programming Port: 2 LAN RJ45
• Relay Port: DB15, supports one relay assigned to the SA out
• Partyline A ,B,C,D (each): XLR-3F, on/off termination switch, Clear-Com and RTS compatible
• Partyline Power On/Off: A/B, C/D paired
• Partyline Output Voltage: 26 – 28VDC, 800mA per pair (A/B or C/D)
• 4-Wire/Matrix Connection: 4 RJ-45
• Program Input: XLR-3F, transformer isolated, line-level input
• Stage Announce Output: XLR-3M, transformer isolated, line-level output
• Front Panel Headset: 4-pin male and 5-pin female options
• Front Panel Displays: 4 OLED’s with encoders and assignable soft keys
• Front Panel Indicators: Antenna Status, Beltpack Status
• External Power Supply Connection: 12VDC
• Base Station Programming/Editing: Push-to-enter rotary encoder

Power

• Input: 100-240V AC, 1.4A max
• Output: 12V DC, 60W, 5A
• Current Draw: 12V, 4A max, 48W max

Dimensions

• 1.75 x 19.0 x 10.2 in (HxWxD)
• (44 x 483 x 259 mm)

Weight

• 5.57 lbs (2.5 kg)