Overview

E-Vision LASER 10K-G

Specifications

• Colour System: Laser Phosphor + 4-segment (RGBW) colour wheel for high brightness
• Display Type: 1 x 0.67" DarkChip™ DMD™
• 1920 x 1200 pixels native.
• Fast transit pixels for smooth greyscale and improved contrast.
• Aspect Ratio: 16x10
• Fill Factor: 87%

Features

Video & Graphics Processing

• HDMI 1.4b for Side by Side, Frame Packing, Frame Sequential & Top Bottom 3D formats.
• Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources
• Dual Pipe Processing: Two sources in parallel for Left and Right eyes.
• Synchronisation of active glasses.
• 3GSDI with loop-through.
• 24p and 1080p native display.
• DICOM simulation mode.

Geometry Correction

• Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.
• Blanking control for custom input window sizing.
• Scaling for fixed aspect ratio screens.

Edge Blending

• For independent edge and blend width adjustment.

Picture in Picture

• Two sources can be displayed either one within the other (PIP), or side by side, with original aspect ratios maintained.

HDBaseT® Interface

• Built in support for reception of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
• Allows the projector to be placed up to 100m from the source with low cost cabling.

Colour Processing

• Powerful seven point colour correction for accurate colour matching.

Projector Controller Software

• Intuitive user interface for network control
• Simultaneous control of user-defined groups of projectors
• At-a-glance monitoring of projector status

Projector Automation

• Real-time clock provides daily on/off automation.

Projector Maintenance

• Sealed optics.
• Long life 20,000 hour illumination.