Overview
INSIGHT LASER 8K
25,000 Lumens | Contrast Ratio: 20,000:1 Dynamic / 2,000:1 Native
Colour System: Laser Phosphor
DMD Specification: Displays 8K-UHD 7680x4320, 4096 x 2160 native
Display Type: 3 x 1.38" DarkChip 3 DMD , +/- 12° tilt angle
Aspect Ratio: 1.9:1
Fill Factor: 87%
Features
- High Performance High resolution projector
- Displays up to 8K-UHD 7680x4320 @ 60Hz
- Ultra high frame rate capability up to 240Hz at 4K resolution
- Smear reduction
- Low latency 2 frames
- Laser power dimming
- Input via DisplayPort or SDI
- Compact integrated chassis
- Long life light source
- Sealed light module
Video and Graphics Processing
- 4 x DisplayPort 1.2
- 4 x 12G-SDI
- 16 x 3G-SDI
- 10 bit processing
Colour Processing
- Powerful seven point colour correction for accurate colour matching.
- Selectable de-gamma curves
- Individual R,G,B lifts and gains
Projector Controller Software
- Intuitive user interface for network control.
- Simultaneous control of user-defined groups of projectors.
- At-a-glance monitoring of projector status.
Projector Automation
- Via LAN
Source Compatibility:
Graphics standards up to 7680x4320 resolution at 60Hz via DisplayPort or SDI.
Inputs/Outputs
| Video & Computer | ||
|
Type |
Connector |
Qty |
| DisplayPort 1.2 12G-SDI in 3G-SDI in |
DisplayPort BNC BNC |
4 4 16 |
| Communication & Control | ||
|
Type |
Connector |
Qty |
| LAN RS-232 Wired Remote |
RJ45 9-pin D-Sub 3.5mm Stereo Jack |
1 1 1 |
| 3D Formats Supported | HDTV Formats Supported |
| N/A | 1080p (24Hz, 60Hz) |
| Computer Compatibility | Bandwidth |
| Up to 7680x4320 | N/A |
| Remote Control | Automation Control |
| Addressable IR remote Control, Wireless and wired. On-Board keypad. |
RS232 LAN |
| Colour Temperature | Operation |
| illumination Type | Typical illumination Life |
| Laser Light Source | 20,000 hours |
| Lenses | |||||||
|
Lens |
Part No. |
Focus Range |
Lens Shift |
||||
| 7680 X 4320 | - | - | - | ||||
| 1.21 - 1.83:1 zoom | 115-627 | 2.5m - 100m | Vert: 0.40 (U) 0.20 (D) frame, Hor: 0.10 (L) 0.14 (R) frame | ||||
| 1.76 - 2.77:1 zoom | 115-630 | 3.5m - 100m | Vert: 0.45 (U) 0.20 (D) frame, Hor: 0.10 (L) 0.17 (R) frame | ||||
| 2.70 - 5.31:1 zoom | 115-632 | 4.5m - 100m | Vert: 0.42 (U) 0.20 (D) frame, Hor: 0.10 (L) 0.17 (R) frame | ||||
| At Native 4K | - | - | - | ||||
| 1.13 - 1.72:1 | 115-627 | 2.5m - 100m | Vert: 0.34 (U) 0.19 (D) frame, Hor: 0.08 (L) 0.10 (R) frame | ||||
| 1.65 - 2.60:1 | 115-630 | 3.5m - 100m | Vert: 0.40 (U) 0.20 (D) frame, Hor: 0.13 (L) 0.13 (R) frame | ||||
| 2.53 - 4.98:1 | 115-632 | 4.5m - 100m | Vert: 0.37 (U) 0.20 (D) frame, Hor: 0.13 (L) 0.13 (R) frame | ||||
* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%
| Lens Mount | ||
|
Motorised shift, zoom and focus. Intelligent Lens Memory with user-definable preset positions. |
||
| Mechanical Mounting | |
| Front/Rear Table Front/Rear Ceiling Adjustable Front/Rear feet Built-in stacking points Eye-bolts for handling a single projector Optional mounting/grab rail |
|
| Power Requirements | Power Consumption |
| 220-240VAC 50/60Hz single phase Power connector: 30A Hubbel | 3800W @ 240VACW |
| Thermal Dissipation | Fan Noise |
| 12965 BTU/Hour @ 240VAC BTU/Hour | 55dBA |
| Operating/Storage Temperature | Operating Humidity |
| Operating: 0 to 35C (32 to 95F) Storage: -20 to 60C (-4 to 140F) |
10 to 90% non-condensing |
| Weight (Chassis Only) | Dimensions |
| 132 kg 291 lb |
L: 100.3cm W: 72.2cm H: 47.9cm L: 39.5 inch W: 28.4 inch H: 18.9 inch |
| Safety & EMC Regulations | UL / cUL, CB, CE, FCC Class A, IEC EN 60825-1 Class 3R Laser Product, IEC EN 62471-5 Risk Group 3, BSMI, FDA, CCC |
| Accessory | Part No. |
| Mounting rail Replacement filter set |
118-471 118-534 |
