Overview

The ARTEC-320 is a passive installation line array in a double 10” configuration. The DAS loudspeaker units has been teamed up with a single M-75 compression driver and purpose-designed injected aluminum high frequency waveguide.

The Artec-300 cabinets are constructed from Baltic Birch plywood and finished with a durable ISO-flex paint. The trapezoidal enclosure design helps eliminate standing wave coloration and at the same time, permits close-packed horizontal or vertical arrays.

The cabinet is manufactured using top quality Birch plywood and finished with a durable black paint finish. The JP-320 joining plates allow for an effective installation solution and are compatible with the ARTEC-322S subwoofer systems. The ARTTEC-320 is delivered with the joining plates.

Features

• Installation Line Array
• 2 x 10MI low frequency loudspeakers, 2.5” VCD
• 1 x D.A.S. M-75 compression driver
• Rigging systems for permanent installation
• Rigging compatible with the Artec-322S

Applications

• A/V systems and corporate events
• Meeting rooms, classrooms, and exhibit areas
• Installations in bars and clubs

Specifications

Performance

• Frequency Range (-10 dB): 60 Hz – 20 kHz
• Horizontal Coverage (-6 dB): 90º
• Vertical Coverage: Splay Dependent
• Nominal Impedance: 16 ohms
• RMS Power Handling: 500 W
• Peak Power Handling: 2000 W
• On-axis Sensitivity 1W/1 m: 99 dB SPL
• Maximum Peak SPL at 1 m: 132 dB
• Recommended Amplifier: PA-2700
• Recommended Processor: DSP-226

Connectors

• Audio Input Connector: Covered Barrier Strip Terminals
• Audio Output Connector: Covered Barrier Strip Terminals

Enclosure

• Enclosure Construction: Birch Plywood
• Enclosure Geometry: Trapezoidal
• Rigging: M10 Rigging Points
• Finish: ISO-flex Paint
• Color: Black
• Depth: 360 mm (14,2 in)
• Dimensions ( H x W x D ): 345 x 710 x 360 mm, 13,6 x 28,0 x 14,2 in
• Net Weight: 26,5 kg ( 58,3 lb )

Components

• LF Driver: 10MI
• HF Driver: M-75