Radial Eng Reamp JCR

Radial Eng Reamp JCR

Radial Eng Reamp JCR

Radial Eng Reamp JCR

Passive John Cuniberti Reamper with level control & filter

SKU: RAD-R800 1030
MSRP: $300.00
MAP: $249.99

Overview

Original Reamp Circuit
The Reamp® JCR is a high-performance passive Reamper that gives you the ability to take a pre-recorded track and send it through a guitar amp or pedal chain, allowing you to explore new sonic textures and experiment with microphone placement, amp and pedal settings without limit. The JCR utilizes the original Reamp circuit designed by recording industry legend John Cuniberti, providing exceptional audio quality that preserves every detail of the original recording while optimizing it to feed amplifiers and effects pedals.

Features

  • Lets you re-record tracks through a guitar or bass amp
  • Original Reamp® circuit designed by John Cuniberti
  • Plug and play easy to use passive design
  • Improves productivity while expanding creative options

Play now, perfect later
The Radial Reamp JCR is the latest version of the original Reamp that was designed and patented by John Cuniberti. It features a 100% passive design with John's original custom wound 'Made in the USA' transformer and circuit. The latest Radial version features separate XLR and ¼" TRS input connectors, variable output level plus a three-position filter that lets you tame excessive highs, warm up the lows or simply bypass if you want to revert to the original circuit. An on-board mute function has also been added to allow you to shut off the signal going to the amps when making adjustments or moving mics around the studio.

JCR Applications

Reamping Part 1
Reamping usually starts by recording a dry clean track. The Radial J48 is an excellent choice for this as it presents the guitar with an ideal impedance for natural tone.

Reamping Part 2
Once the dry track is recorded, send it back to the Reamp JCR where it can feed a guitar or bass amplifier. Mic the amp to capture the new tone. Move the mic around to find the sweet spot.

Adding Pedals
Take things one step further by introducing effects pedals into the mix. Try a wah pedal on kick drum; envelope on snare; distortion on a vocal track. Let your imagination run free!

Specifications

Audio circuit type: Passive, transformer isolated
Frequency response: 20Hz ~ 20kHz (+0dB/-1dB)
Dynamic range: 140dB
Total harmonic distortion: 0.001% @ 1kHz/0dBu input
Intermodulation Distortion: 0.0025% @ 1kHz/-10dB input
Phase Deviation: 2º @ 100Hz; 0º @ 800Hz
Input Impedance: 1800 Ohms
Output Impedance: 4.8k Ohms
Common Mode Rejection Ratio: -55dB @ 55Hz
Noise: -115dBu
Maximum Input: +26dBu
Features
180° polarity reverse, Ground lift, HPF, LPF, Level Control
Input Connectors: 1/4" TRS, XLR
Output Connectors: 1/4" unbalanced
General
Construction: 14-gauge steel chassis & outer shell
Size (L x W x D): 3.3" x 5.0" x 2" (84 x 127 x 48mm)
Weight: 1.32lb (600g)
Shipping size (L x W x D): 4" x 3" x 6.5" (102 x 76 x 165mm)
Shipping weight: 1.85lb (840g)
Power: Passive, no power required
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable