Radial Eng Ice Cube

Radial Eng Ice Cube

Radial Eng Ice Cube

Radial Eng Ice Cube

Line level isolator, passive 1 channel balanced with Eclipse transfomer

SKU: RAD-R800 1031
MSRP: $96.00
MAP: $79.99

Overview

Balanced XLR Line Isolator
The IceCube™ is a balanced line-level isolator designed to quickly eliminate hum and buzz from an audio system by simply inserting it into the signal path.

Features

  • Eliminates hum & buzz caused by ground loops
  • Exceptionally linear response from 20Hz to 18kHz
  • Can handle pro output levels without distortion
  • Plug & play easy to use with XLR input & output

Eliminate ground loops quickly
The IceCube is an ideal problem solver for today's AV technicians and audio engineers, providing an easy way to insert an isolation transformer into the signal path to remove hum and buzz from ground loops, with a ground lift switch for additional noise reduction. Simply connect it between any two line-level devices, such as a mixer and a powered speaker, or a crossover and a power amp. The IceCube will eliminate ground loop noise without limiting the audio bandwidth or introducing phase shift, and it can handle hot signal levels without distortion.

IceCube Applications

Isolating the DJ mixer from a console
Plug a couple of IceCubes in between the DJ mixer and the main PA to rid the system from hum or buzz caused by ground loops. Standard XLR connections make it easy.

Isolating a crossover from a power amp
Eliminating noise problems can take hours of troubleshooting. The IceCube takes the hassle out of the equation with a plug and play solution that works every time.

Isolating a console from a remote tower
When distant power systems power equipment it often leads to noise, due to voltage fluctuations and ground contamination. The IceCube isolates the system to reduce noise.

Specifications

Audio circuit type: Passive, transformer based
Transformer: Custom made Eclipse
Number of channels: 1
Frequency response: 20Hz ~ 20KHz (± 1dB)
Gain: 0dB / -5.7dB 10K / 600 Ω Load
Clip Level: 25dBu
Total harmonic distortion: <0.0006% 1KHz @ -10dBu
Intermodulation Distortion: 0.002% @ -10dBu
Input Impedance: 8.66k with 10k load
Output Impedance: 600 Ω nominal
Equivalent Input Noise: 110dBu
Maximum Input: 15dBu
Features
Ground lift
Input Connectors: XLR Female
Output Connectors: XLR Male
General
Construction: 16-gauge steel
Size (L x W x D): 4.2" x 1.32" x 1.6" (107mm x 34mm x 41mm)
Weight: 0.40lbs (0.18kg)
Shipping size (L x W x D): 8" x 5" x 3" (203mm x 127mm x 76mm)
Shipping weight: 0.55lbs (0.25kg)
Power: Passive, no power required
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable