Overview

The Attero Tech unD6IO is a cost-effective, multi-IO Dante network audio wallplate, featuring XLR, RCA and 3.5 mm inputs along with one 3.5 mm and two balanced outputs in a dual-gang form factor. The unD6IO is PoE enabled, delivering all connectivity (power, control and audio data) with a single CAT-5e/6 cable. The size and I/O density of the unD6IO make it easy to put Dante connectivity wherever it is needed - near the audio source or sink - thereby eliminating costly and interference-prone analog wiring.

Features & Benefits

• 2 x balanced XLR mic/line inputs, 2 x RCA and 1 x 3.5 mm input
• 1 x 3.5 mm output and 2x balanced outputs on a side-mounted depluggable connector, with software-controllable volume
• Q-SYS Extension allows for drag-and-drop integration into your
• Q-SYS design
• PoE capable
• Three software-selectable gain levels are available on the XLR input to accommodate a wide variety of input levels and devices.
• +48 V phantom power
• Dante Domain Manager-ready

Specifications

Audio Inputs

• Input types: 2 x XLR (balanced and RF filtered)
  2 x RCA (stereo unbalanced)
  1 x 3.5 mm (stereo unbalanced)
• Gain: -18 dB, -3 dB, +25 dB and +40 dB,
  software selectable (Inputs 1/2)
• Maximum input levels: +20 dBu @ -18 dB gain,
  +6 dBu @ - 3 dB gain,
  -23 dBu @ +25 dB gain
  -38 dBu @ +40 dB gain (Inputs 1/2)
  +12 dBu ( Inputs 3/4 A & B)
• Phantom power: +48 V (inputs 1 & 2 only)

Audio Outputs

• Output type: Two balanced line level with automatic muting on loss of Dante signal on 6-pin Depluggable Euroblock (Outputs 1/2 B) Two unbalanced line level outputs on stereo 3.5 mm TRS (Outputs 1/2 A)
• Attenuation range: -60 dB to 0 dB (software-controlled)
• Maximum output levels: +12 dBu at 0 dB attenuation (output 1/2 A)
• +20 dBu at 0 dB attenuation (output 1/2 B)

Dante Network

• Physical level: Standard Ethernet
• Connector: Single RJ-45
• Cable type: CAT-5e or higher
• Supported sample rates: 44.1 kHz, 48 kHz

General

• Power: PoE (802.3af)
• Dimensions (HWD): 4.2 x 3.5 x 2 in (114.3 x 88.9 x 50.8 mm)
• Decora wall plate (2-gang): 4.87 x 4.94 x 0.08 in (123.7 x 125.48 x 2.03 mm)
• Weight: 0.6 lb (.27 kg)