Overview
The AD-S12 12" 2-Way AcousticDesign Surface Mount and Loudspeaker from QSC is designed to serve as a versatile, all-weather device. The speaker uses DMT (Directivity Matched Transition) technology to provide a uniform frequency response over the axisymmetric coverage area. The ABS polymer enclosures, sealed input panel covers, and powder coated aluminum grille allow for indoor and outdoor use.
The included X-Mount System is designed to offer simple installation. Articulation marks allow the loudspeaker to be pre-installed on the ground and knurled surfaces at the pivot planes work to prevent the speaker from drifting or sagging over time.
Features
- 12” weather treated woofer; 1.4” compression driver
- 75° conical DMT coverage
- Maximum peak SPL 126 dB
- DMT™ (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage area
- X-Mount™ system enables the loudspeaker to be easily installed and deployed at a variety of angles with no slippage over time
- Optional Yoke mount and M10 Kit-C for additional installation versatility
- Advanced voicing filter sets using QSC Intrinsic Correction™, available through either Q-SYS processing or CXD amplifier platforms
- Lightweight ABS enclosures offer long-term durability and lasting good looks
- Sealed input panel cover and powder coated aluminum grilles for added weather resistance
- Meets IEC60529 IP-54 for dust and splash resistance
- Available in black (RAL 9011) or white (RAL 9010)
- Complete EASE, CF2, CAD, and BIM information available online
Specs
| Frequency Range | 52 Hz to 20 kHz |
| Noise Power | 300 W / 50 V (rms) |
| Sensitivity | 95 dB SPL |
| Coverage Angle | (-6 db): 75° |
| Directivity Factor | 12 |
| Directivity Index | 11 dB |
| Maximum Sound Pressure Level (SPL) | Continuous: 120 dB Peak: 126 dB |
| Impedance | 8 Ω |
| Recommended Amp Power | 600 W |
| Transformer Taps | 70 V: 100 V: |
| High Frequency Transducer | 1" exit / 1.4" voice coil compression driver |
| Low Frequency Transducer | 12" weather resistant paper cone woofer |
| Input Connector | Euroblock connector with parallel output terminals |
| Weight | 35.2 lb (16.0 kg) |
| Dimensions | 23.4 x 13.9 x 12.7" (59.4 x 35.4 x 32.3 cm) |
