Overview
The Mackie DLM12 Full-Range 12" Powered Loudspeaker delivers 1,000 watts of program power and 2,000 watts of peak power in a compact, portable design. It features TruSource driver technology, incorporating a 12" low-frequency driver and a 1.75" compression driver into a common-magnet design. The TruSource DSP delivers clarity, consistent dispersion and high fidelity sound.
The DLM12 features an integrated DL2 digital mixer, a 2-channel mixer with a versatile connection options. It also includes 3-band EQ, 16 effects presets, feedback destroyer, 6 speaker modes, and Smart Protect technology.
The DLM12 can be pole or wall mounted. An integrated kickstand allows use as a wedge-style monitor. M10 mounting points allow it to be used in fly installs as well.
Features
- 2000W power via Class-D amplification
- 12³ LF woofer / 1.75³ HF compression driver
- Incredibly compact, lightweight design
- Powerful TruSource DSP delivers seamless clarity, consistent coverage and unmatched fidelity
- DL2 Integrated Digital Mixer
- Powerful, one-touch digital mixer with bright OLED screen
- Two highly versatile input channels with FX
- Independent channel level, 3-band EQ and effects control
- 16 great-sounding channel effects include reverb, chorus and delay
- XLR/TRS combo and dual RCA connectors
- Handles mic, line, stereo and instrument signals
- Unmatched system control for professional applications
- Multi-band feedback destroyer
- Six speaker modes deliver the perfect voicing for your application
- Alignment delay up to 300ms for delay stack, balcony, etc.
- Three memory locations for instant venue setting recall
- Smart Protect DSP dynamically protects amp/driver
- Innovative ultra-compact design
- 1/3 smaller than a traditional 2-way
- Fit an entire DLM system in nearly any car
- Stack them up for storage
- Pole-mountable on tripod or atop DLM12S using SPM300 speaker pole
- Flyable via standard M10 rigging hardware
- Wall-mount them using SWM300 articulated arm for stealthy, powerful install system
- Roadworthy PC-ABS cabinet with pro black finish and ergonomic top carry handle
- Rugged, powder-coated 20 gauge steel grille
- Integrated kickstand delivers perfect angle for personal monitor use
- Ridiculously lightweight (31 lbs. / 14.1 kg)
Specs
| Active or Passive | Active, Class D amplification |
| Power Capacity | 1,000W RMS 2,000W peak |
| Low Frequency Driver | 12" (305 mm) woofer 2.5" (64 mm) voice coil diameter Paper diaphragm Ferrite magnet |
| High Frequency Driver | 1.75" (44 mm) compression driver 1" (25 mm) horn entry diameter Polyimide film diaphragm Ferrite magnet |
| Frequency Response | 38 Hz to 20 kHz (-10 dB) |
| Maximum Sound Pressure Level (SPL) | 128 dB @1 m, calculated |
| Crossover | 1.6 kHz |
| Dispersion | 90° conical |
| Equalization | Low shelving: ±15 dB @ 80 Hz Mid-peaking: ±15 dB @ 2.5 kHz High shelving: ±15 dB @ 12 kHz Increments: ±3 dB |
| Amplifier Power | Low Frequency Amplifier: 500W RMS, 1,000W peak Rated THD: < 1% Cooling: multi-speed fan Class D design High Frequency Amplifier: 500W RMS, 1,000W peak Rated THD: < 1% Cooling: multi-speed fan Class D design |
| Audio Inputs | 1 x XLR/TRS combo - Channel 1 (XLR is mic/line switchable) 1 x XLR/TRS combo - Channel 2 (TRS is a Hi-Z input) 2 x RCA phono - Channel 2 (1 x L/R) |
| Input Impedances | Channel 1: Mic: 3.3kΩ balanced Line: 20kΩ balanced, 10kΩ unbalanced 1/4" TRS: 16kΩ balanced, 8kΩ unbalanced Channel 2: XLR Line: 20kΩ balanced, 10kΩ unbalanced 1/4" TRS [Hi-Z instrument]: 1MΩ unbalanced RCA: 25kΩ unbalanced |
| Audio Output | 1 x XLR - Thru (switchable output, channel 1 or mix) |
| Mixer Section | DL2 Digital Mixer System Processing: EQ: 6 speaker modes Alignment delay: 0 to 300 ms FX: 16 presets Multi-band feedback destroyer: On / Off / Clear / Hold Memory: 3 locations for instant venue setting recall and factory reset |
| Power Requirements | 100 to 120VAC or 220 to 240VAC, 50/60 Hz, 250W |
| AC Plug Style | 3-pin IEC 250VAC |
| Operating Temperature Range | 32 to 104°F (0 to 40°C), extended ambient temperature |
| Construction | PC-ABS cabinet High durability black paint finish Top handle Powder-coated 20 gauge steel grille Three M10 x 17 mm fly points 50° monitor angle (using integrated kickstand) |
| Mounting Options | Pole mount, wall mount or fly via three integrated M10 x 17 mm mounting points |
| Dimensions (H x W x D) | 15.9 x 15.3 x 14.3" (403 x 389 x 363 mm) |
| Weight | 31 lb (14.1 kg) |
