LEA CONNECT 1504

4 Channel x 1500 watt @ 4Ω, 8Ω, 70V and 100V per channel. Advanced DSP w/FIR Crossovers, IoT Device with built in Wi-Fi Hotspot, Wi-Fi or FAST Ethernet connectivity. Highly Efficient Power Supply with Class D Output Stage.

SKU: LEA-Connect 1504

MSRP: $6,200.00

MAP: $6,200.00

Description

Overview

Introducing the CONNECT 1504 & CONNECT 3004 high power IoT-enabled amplifiers. The range includes four new four-channel models available in configurations ranging from 1,500 to 3,000 watts (into 2, 4, and 8 ohms as well as 70Vrms and 100Vrms). These new additions to the CONNECTSERIES amplifiers are available in NETWORK CONNECT and DANTE CONNECT versions, including both Dante and AES 67 connectivity options. All models provide three different methods of network connection: using the amplifier’s built-in Wi-Fi Access Point, connecting to an existing Wi-Fi network, or using a Local Area Network Ethernet connection. Then there’s the Cloud…The CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.

Features

Web Browser-based UI – works on any device with no software to download
Direct LoZ and HiZ (70V or 100V) selectable per channel
Proprietary Smart Power Bridge allows user to bridge a channel to achieve double the power of that channel without sacrificing an amplifier channel
3 Ways to Connect 1.) Built in WiFi Access Point 2.) Connects to existing WiFi network 3.) Local Area Network Ethernet connection
96kHz Analog Devices DSP with Input Routing, multiple 48dB/Oct crossover filters, 8 Parametric EQ filters, user configurable speaker limiters, and real time load monitoring
Universal Switch Mode Power Supply with PFC. Operation from 100VAC – 240VAC +/-15%
Analog fully routable inputs
External I/O Port for Remote On/Off and fault monitoring
Highly Efficient Class D Output Stage for low AC Current draw

Specifications

Analog: Balanced analog Inputs with user selectable 26 dB and 34 dB input sensitivity
THD+N: 0.1% (20Hz to 20kHz)
Frequency Response: 20Hz to 20kHz, +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω
Signal to Noise Level: 105dB (20Hz to 20kHz referenced to 8Ω)
Crosstalk: 70dB (20Hz to 20kHz)
Amplifier Output Classification: Class D with Proprietary Smart Power Bridge Technology allowing for bridged output functionality without sacrificing an amplifier channel. This model has two Smart Power Bridge channels.
DSP Architecture: Analog Devices Sharc 96kHz DSP Processor with 32-bit floating point support and built in sample rate converters
Input Matrix: Routable matrix; any input to any output with primary and secondary input priority
Crossovers: Advanced DSP with Linear Phase FIR Crossovers and up to 48dB/Octave IIR Filters (Linkwitz Riley and Butterworth)
Parametric EQ: 16 Band Parametric EQ per channel
Output Delay: 4 seconds per channel
Output Protection: DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection
User Adjustable Limiting: Peak Voltage and RMS Voltage
Load Monitoring: Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources
User Interface: Web Browser User Interface, 3rd Party API control, or CLOUD control
External I/O: In: Toggles Remote On/Off
External I/O: Out: Indicates Amplifier Health
AC Mains: 100VAC - 240VAC +/- 15% 50Hz or 60Hz
Power Supply: Universal Switch Mode Power Supply with Power Factor Correction
Dimensions: Product: 17.88” x 19” x 2U (454mm x 482mm x 2U)
Weight: Shipping Weight 30 lbs / 13.6 kg

Cooling:

Front to Rear Variable Fan Speed Cooling
Fan Noise at idle is 50dB @ 1m
Fan Noise at 50% is 57dB @1m
Fan Noise at full speed is 63dB @ 1m