OVERVIEW
- 2 x Core 4060 Microphones for Normal SPL
- 2 x XLR Adapters with Belt Clip
- 2 x Boundary Layer Mounts
- 2 x Surface Mounts
- Core Increases Mic Performance by 6 dB
- 2 x Soft-Boost Grids
- 2 x Holder for Strings
- 1 x Magnet Mount
- 5 x Foam Windscreens
- Includes Carry Case
SPECIFICATIONS
| Directional Pattern | Omnidirectional |
| Principle of Operation | Pressure |
| Cartridge Type | Pre-polarized condenser |
| Frequency Range | 20 Hz to 20 kHz (±2 dB) Soft-Boost Grid: 20 Hz to 20 kHz, 3 dB soft boost at 8 to 20 kHz High-Boost Grid: 20 Hz to 20 kHz, 10 dB boost at 12 kHz |
| Sensitivity | Nominal, ±3 dB at 1 kHz: 20 mV/Pa; -34 dB re. 1 V/Pa |
| Equivalent Noise Level | A-Weighted: Typ. 23 dBA re. 20 µPa (max. 26 dBA) ITU-R BS.468-4: Typ. 35 dB (max. 38 dB) |
| Signal to Noise Ratio | A-Weighted, re. 1 kHz at 1 Pa (94 dB SPL) Typ. 71 dBA |
| Total Harmonic Distortion (THD) | Core: Typ. 129 dB |
| Dynamic Range (Typical) | Core: 106 dB |
| Max SPL | Peak before Clipping: 134 dB |
| Output Impedance | 30 to 40 Ohms |
| Cable Drive Capability | Up to 984' / 300 m |
| Power Supply | For Wireless Systems: Min. 5 V max. 50 V through DPA adapter With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance |
| Connector | MicroDot |
| Microphone Diameter | 0.21" / 5.4 mm |
| Microphone Length | 0.5" / 12.7 mm |
| Cable Length | 5.9' / 1.8 m |
| Polarity | Positively increasing sound pressure produces positive going voltage on MicroDot pin |
| Temperature Range | -40 to 113°F / -40 to 45°C |
| Relative Humidity | Up to 90% |
| Weight | 0.26 oz / 7.5 g, including cable and MicroDot connector |
