With very low noise and a high sensitivity, our ceiling and tabletop microphones offer the most clear, transparent, and natural sound available on the small footprint mic market. They ensure maximum speech intelligibility regardless of the acoustical environment. With a linear response, low distortion and an extremely large dynamic range, they sound great in any environment.

The Microphone Base is made specifically to work with the 4098 CORE Supercardioid Podium Microphone. It has an elegant yet unobtrusive design with a white, non-reflective surface and integrated shock mount. The audio cables are an integral part of the Microphone Base unit.

The Microphone Base fits most electrical back boxes and secures ease of installation. Furthermore, the great off-axis response and the physics of sound level vs distance, makes it possible to cover a small to mid-size room with only one or a few microphones. Read more about microphones in installed systems.

A complete, supercardioid ceiling microphone solution, which is ideal for mounting from the ceiling of conferences venues, meeting rooms, board rooms and other small to mid-sized spaces.

The standard ceiling solution is equipped with a 16 cm (6 in), white gooseneck and comes in three standard kits to meet your exact needs.

• Outstanding audio quality
• Slim, elegant Scandinavian design
• Highly directional – very isolated
• High rejection of radio frequency interference
• Meets the needs of architects, AV consultants, system integrators and installing electricians

• Directional pattern: Supercardioid
• Principle of operation: Pressure gradient
• Cartridge type: Pre-polarized condenser
• Frequency response: 20 Hz - 20 kHz
• Sensitivity, nominal, ±3 dB at 1 kHz: 16 mV/Pa; -36 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
• Effective frequency range ±2 dB, at 20 cm (7.9 in): XLR-3M: 100 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz and permanent 2nd order low-cut filter at 80 Hz
• Equivalent noise level, ITU-R BS.468-4: Typ. 35 dB (max. 38 dB)
• Distortion, THD < 1% - Legacy: 122 dB SPL RMS, 125 dB SPL peak
• Distortion, THD < 1% - CORE: 130 dB SPL RMS, 133 dB SPL peak
• Dynamic range - Legacy: Typ. 102 dB
• Dynamic range - CORE: Typ. 110 dB
• Max. SPL, THD 10%: 135 dB SPL peak
• Minimum load impedance: 2 kΩ
• Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with
• DAD6001-BC XLR Adapter
• Color: white
• Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on XLR connector or DAD6001-BC XLR adapter)
• Temperature range: -40°C to 45°C (-40°F to 113°F)
• Relative humidity (RH): Up to 90%