DPA 4011-DF-F-B01-120

DPA 4011-DF-F-B01-120

DPA 4011-DF-F-B01-120

DPA 4011-DF-F-B01-120

4011 Cardioid Mic, Black, XLR, 122 cm (48 in) Boom, Floor Stand, Single Mic

SKU: DPA-4011-DF-F-B01-120
MSRP: $2,540.00
MAP: $2,540.00

Overview

d:signâ„¢ 4011 Cardioid Mic, Black, XLR, 122 cm (48 in) Boom, Floor Stand, Single Mic

This condenser microphone is renowned in recording studios and live applications around the world as an exceptional mic. State-of-the-art components have been carefully selected to provide optimal neutrality, accuracy and extremely low distortion.
The principal appeal of the 4011 Cardioid Mic is its directional quality and attention to detail. This mic makes everything sound like the original. The first-order cardioid pickup pattern provides superb separation between sound sources. It is equally suitable for close-up work on acoustic guitar, grand piano, overheads, percussion, wind instruments and vocals as it is for spot-miking symphonies. It can handle incredibly high sound pressure levels (SPLs).

A flat on-axis frequency response and excellent phase response deliver a faithful reproduction of the original sound. The off-axis response is similarly smooth so that any leakage is an accurate reflection of the original, though attenuated according to the true first-order cardioid pickup pattern.

A complete cardioid microphone floor stand solution in the modular d:signâ„¢ Microphone Series offering a high-quality stage voice or instrument mic.

This floor stand solution has an elegant and exclusive design with a black, non-reflective surface specifically made to handle the, from time to time, rough life in TV-studios, OB-vans and onstage in theaters and concert halls. The Floor Base has an integrated shock mounting solution. The thread screw holds the Stand Extension and MMP-F Modular Active Boom. This unique design allows for a long stage microphone boom pole that does not swing, but rapidly stabilizes itself after being positioned.

These floor stand solutions can quickly, and with no tools needed, transform into a new configuration. You can combine it with another d:dicateâ„¢ Microphone Capsule or Preamplifier.

d:signâ„¢ 4011 Floor Stand Microphones

Using the MMC4011 Cardioid Microphone Capsule for its directional quality and attention to detail, this solution makes everything sounds like the original. The first-order cardioid pickup pattern provides superb separation between sound sources. It is equally suitable for close-up work on acoustic guitar, grand piano, overheads, percussion, wind instruments and vocals as it is for spot-miking symphonies. It can handle incredibly high sound levels.

A flat on-axis frequency response and excellent phase response deliver a faithful reproduction of the original sound. The off-axis response is similarly smooth so that any leakage is an accurate reflection of the original, though attenuated according to the true first-order cardioid pickup pattern.

Features
  • Ultra-compact spot or hanging mic
  • Close-miking
  • Great for high sound pressure levels
  • Accurate sound
  • Colorless sound
  • Modular flexibility

Specifications

  • Directional Pattern: Cardioid
  • Principle of operation: Pressure gradient
  • Cartridge type: Pre-polarized condenser
  • Frequency response: 20 Hz - 20 kHz
  • Dynamic range: Typ. 121 dB
  • Length: 122 cm
  • Single or Twin: Single Mic
  • Effective frequency range, ±2 dB, at 30 cm (11.8 in): 40 Hz - 20 kHz
  • Sensitivity, nominal, ±2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB
  • Distortion, THD < 1%: 136 dB SPL RMS, 139 dB SPL peak
  • Max. SPL, THD 10%: 144 dB SPL peak
  • Rated output impedance: 100 Ω
  • Minimum load impedance: 2 kΩ
  • Cable drive capability: 100 m (328 ft)
  • Output balance principle: Impedance balancing
  • Common mode rejection ratio (CMRR): > 40 dB
  • Power supply (for full performance): P48 (Phantom Power)
  • Current consumption: 3.5 mA
  • Maximum output voltage, RMS: 2.2 V
  • Polarity: +V at pin 2 for positive sound pressure
  • Matching tolerance (frequency response and sensitivity): ±1 dB
  • Phase deviation for kit: < 10°
  • Microphone diameter: 19 mm (0.75 in)
  • Capsule diameter: 19 mm (0.75 in)
  • Microphone length: Capsule: 23 mm (0.9 in), Boom poles: 20 cm (8 in), 32 cm (13 in), 47 cm (18 in), 77 cm (30 in), 122 cm (48 in)
  • Temperature range: -40°C to 45°C (-40°F to 113°F)
  • Relative humidity (RH): Up to 90%