Overview
The 3532-SP is a complete state-of-the-art A-B Stereo Kit with two 4041-SP microphones, carefully matched within +/-0,5 dB on both frequency response and sensitivity in the microphone's entire frequency bandwidth. It is the ultimate choice for the demanding engineer and audio purist who emphasizes clarity, openness, precision, low self-noise and high sensitivity. The kit is designed for a broad range of uses, mainly as main pair for classical, jazz and folk genres, grand pianos, guitars, overheads or close-miking drums, choirs, strings, wind instruments and much more. You get a bright and transparent sound quality with lots of headroom. With its soft boost, which is present on-axis and gradually goes towards linearity off-axis, the 4041-SP omni microphone can be angled to use as a natural equalizer.
Specifications
- Directional pattern: Omnidirectional
- Principle of operation: Pressure
- Cartridge type: Condenser w. stainless steel diaphragm
- Frequency range: 20 Hz - 20 kHz
- Frequency range, ±2 dB: 20 Hz - 20 kHz with 4 - 6 dB soft boost at 8 kHz
- Sensitivity, nominal, ±2 dB at 250 Hz: 70 mV/Pa; -23 dB re. 1 V/Pa
- Equivalent noise level, A-weighted: Max. 8 dB(A) re. 20 µPa
- Equivalent noise level, ITU-R BS.468-4: Max. 20 dB
- S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): 86 dB(A)
- Total harmonic distortion (THD): < 0.5% THD up to 120 dB SPL peak, < 1% THD up to 126 dB SPL peak
- Dynamic range: Typ. 118 dB
- Max. SPL, peak before clipping: 134 dB
- Output impedance: < 200 Ω
- Cable drive capability: Up to 100 m (328 ft)
- Power supply (for full performance): Via external power supply
- Current consumption: 2.20 mA
- Connector: 3-pin XLR-M (Standard P48)
- Weight: 190 g (6.7 oz)
- Capsule diameter: 24 mm (1 in)
- Microphone length: 170 mm (6.7 in)
- Temperature range: -40°C to 45°C (-40°F to 113°F)
- Relative humidity (RH): Up to 90%
