Overview
Powering this remarkable amplifier is the pioneering technology of DriveCore™, which integrates the amplifier drive stage into the power output stage fusing everything into a chip the size of a dime. DriveCore's front-end drive circuits leverage the inherent efficiency of Class D output stages while also maintaining superb sonic characteristics. The end result is an audio amplifier circuit that exhibits the exemplary audio quality of a highly evolved Class AB design.
Features
-
Flexible Input Routing
-
Convection Cooled
-
Universal Power Supply
-
Integrated Life-Safety Features
-
Up to 8X125W in 1U chassis with no fan
-
DriveCore™ technology provides >90% efficiency with no compromise in performance
-
Patented Feedback and Protection Circuits
-
Amplifier is stable for 2 – 16 Ohm Loads
-
XFMR 4/8 needed for 70V/100V Applications
Specifications
|
Channels |
8 |
|
Sensitivity |
1.4 V |
|
Rated Power Output (all channels driven) |
75W per CH @ 4 ohms, 75W per CH @ 8 ohms |
|
Signal to Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted) |
110 dB |
|
THD (full rated power, 20 Hz - 20 kHz) |
< 0.05% |
|
Intermodulation Distortion (from 0 dB down to -30 dB) |
< 0.05% |
|
Frequency Response (at 1W, 4/8 ohms) |
+/- 0.5 dB |
|
Crosstalk (below rated power) 20 Hz to 1 kHz |
> 70 dB |
|
Common Mode Rejection (20 Hz to 1 kHz) |
> 55 dB, typically > 70 dB |
|
Voltage Gain |
25 dB |
|
DC Offset |
+/- 20mV |
|
Idle Power Consumption (Standard Mode) |
23.0W |
|
Dimensions |
1.75" x 19" x 15.19" |
|
Weight |
10lbs/4.54kg |
|
Shipping Weight |
15 lbs/6.8 kg |
|
IEC Power Connector |
15A |
