Overview
- Single-Channel Intercom Station with Loud Alert Buzzer
- Up to 64 intercom stations per system
- Configure up to 40 call buttons per station*
- Plug-and-go installation with hardware discovery
- Audible and visual call signaling
- Web-browser configuration editor
- IP-65 rating**
Specifications
Connectors
- Handset: 4-pin male XLR
- Ethernet/PoE: RJ-45
Earphone Amplifier
- Load Impedance: >32 Ohms
- Output Level: +1 dBu before clipping
- Sidetone: -6dB (selectable)
- Specified for a route from a 4-wire input @0dBu in:
- Max Gain: 12dB
- Noise: <-65dBu (@ max gain)
- Headphone Limiter: -0dBu, Selectable
Environmental
- -14°F to +131°F (-10°C to +55°C)
- Humidity: 0 – 95%, relative
Weight
- 27.9 oz (0.79 kg)
Microphone Pre-Amplifier
- Handset Mic Impedance: 200 Ohms, Dynamic
- Mic Limiter Range: >35dB
- Mic Gain: 60dB, Dynamic
- Frequency Response: 400Hz – 8kHz, + 3dB (contoured for intelligibility)
- Distortion: < -55dBu, Dynamic
Power
- Power Requirements: 5W DC
- Voltage Range: 30 – 60V
Ethernet
- Fast Ethernet Standard: 100 BaseT only, Auto MDIX
Dimensions
- 10 x 8 x 3.6 in (HxWxD)
- (254 x 203 x 93 mm)
Features
Loud and Clear
- A loud alert buzzer rings when the system receives a call so it can alert users in the noisiest of environments.
Rated for Outdoor Use
- When properly flush-mounted to a wall with good perimeter seals, or in a “Hoffman” style box, the unit is IP-65 rated for outdoor conditions.
