Overview

• 2-Channel Full-duplex Digital Beltpack
• Access to any 2 channels from up to 24 available channels of audio
• Binaural listening on HXII-BP-X5 beltpacks
• Assign to a pre-defined role to make sure multiple devices are configured identically
• Power and audio over a Power-over-Ethernet (PoE) or single XLR cable
• Program audio with separate program level control
• Stacked key assigns multiple channels to a single key
• 10-character yellow OLED label display
• USB flasher mode
• USB Micro-AB port
• Pushbutton menu access
• Recessed level rotary knob controls
• XLR-4M or XLR-5F headset jack
• Rugged, light-weight poly-carbonate casing
• IP-53 environmental rating for weather-proofing

Specifications

Channels

• Two intercom channels (Selectable) Program Audio (Assignable from Main Station)

Connectors

• Intercom Line: 3-pin XLR–F
• LAN/PoE: RJ-45 etherCON
• Headset: 4-pin XLR–or 5-pin XLR-F
• USB: Micro AB

Microphone Pre-Amplifier

• Headset Mic Impedance: 200Ω (Dynamic)
• Headset Mic Voltage: 1.7V (Electret selectable)
• Limiter: +23dB
• The following specified for a route to four-wire output at 0dBu out
• Mic Gain: 60dB (Dynamic), 45dB (Electret)
• Frequency Response: 300Hz – 10 kHz ±3dB, contoured for Intelligibility
• Distortion: <0.2% THD @ 1kHz
• Noise: <-55dBu (Dynamic) <-65dBu (Electret)

Headphone Amplifier

• Load Impedance: >32Ω
• Output Level: +12dBu before clipping
• Sidetone: -12dBu (selectable)
• The following specified for a route from a four-wire input at 0dBu in
• Max Gain: 0dB
• Frequency Response: 40Hz – 10kHz ±3dB
• Distortion: <0.2% THD @ 1kHz
• Noise: -65dBu
• Headphone Limiter: 0dBu (selectable)

Power Requirements

• 4W DC Voltage Range: 30-60 volts 4W
• Power-over-Ethernet (PoE)

Environmental

• 32°F to +104°F (0°C to +40°C)
• 0 – 90% relative humidity

Dimensions

•  5.3 x 3.9 x 1.7 in (HxWxD)
• (135 x 99 x 43 mm)

Weight

• 12.2 oz (0.35 kg)

Features

Single Cable Operation

• All networked intercom channels and power for beltpacks or a combination of user devices can be transmitted over a single shielded twisted-pair cable (mic cable for powerline, CAT5/6 for Power-over-Ethernet).

Power and Audio Over a Single Cable

• Carry power and audio over Power-over-Ethernet (PoE) or a single twisted-pair XLR cable to deliver up to 2 of any 24 available channels and program feed audio to the beltpack.

Stackable Keys

• Multiple channels can be assigned to a single key, allowing one key to address many channels with a single push of a button.

Turn USB Port into a Call Assignment

• When a USB light is connected to the beltpack via the USB Micro-AB port, the beltpack can be configured to blink the light or keep the light on for assigned channels.