Overview

Add tally to your ATEM switcher with Blackmagic Design's GPI and Tally Interface! With 8 contact closure tally outputs, you can send a tally signal to your cameras, replay machines and monitors so everyone knows which camera is 'on-air'! If you need more tally outputs, simply connect multiple GPI and Tally Interfaces together because it connects via Ethernet to your ATEM production switcher.

Specifications

Connections

Contact Closure

25 pin D-type connector
providing 8 opto isolated inputs and 8 relay contact closure outputs.

Computer Interface

1 x USB 2.0 high speed i
nterface for configuration and firmware updates.

Inputs

Optical isolators triggered by
connection to ground.
Max 5V at 14mA.

Outputs

Mechanical relay contact
closure to ground. Max 30V at 1A.

Ethernet

10/100 BaseT with loop
through for connecting to other ethernet enabled equipment.

Software

Software Included

Configured via ATEM Switcher Utility.

Internal Software Upgrade

Firmware built into
software driver. Loaded at system startup or via updater software.

Operating Systems

Mac 10.10 Yosemite,
Mac 10.11 El Capitan or later.

Windows 8.1 or Windows 10.

Power Requirements

Power Supply

12V power supply included with
international socket adaptors for all countries.

Environmental Specifications

Operating Temperature

0° to 40° C (32° to 104° F)

Storage Temperature

-20 - 60 degrees celsius

Relative Humidity

Up to 95%