The AN-16/o v.4 Output Module is a 1U rack-mount 16-channel digital-to-analog converter for Pro16® digital snake and audio distribution systems. Digital audio transmitted to the AN-16/o v.4 via Aviom's A-Net® Pro16 digital audio transmission protocol is converted to analog using 24-bit 48kHz converters. Sixteen balanced outputs are provided on the rear panel via DB25 multipin connectors. The analog outputs can be set (per channel pair) to +24dBu +18dBu +4dBu or mic level.
Use the AN-16/o anywhere analog outputs are required: on stage or FOH in a digital snake in the studio for a recording split or in even the most complex audio networks. Adding a digital split to a system is as simple as connecting an additional AN-16/o v.4 Output Module.
Features:
- 16 balanced mic- or line-level outputs
- Four-position output level switch per channel pair
- +24 +18 and +4dBu line-level or mic-level outputs
- 48kHz 24-bit D/A converters
- Unlimited splits and digital copies
Specifications:
| Audio Outputs | 16 channels, balanced |
|---|---|
| Outputs | DB25 multipin connectors (2); Tascam® analog audio pinout Impedance balanced output for mic, +4dBu, and +18dBu; differential output for +24dBu |
| D/A Conversion | 48kHz sample rate, 24 bit |
| Frequency Response | 4Hz-22kHz |
| A-Net Input/Output | one EtherCon Category 5 (RJ45 connector) |
| A-Net Expansion | one EtherCon Category 5 (RJ45 connector) |
| Output Level Settings | Four-position switch, per channel pair; +24dBu, +18dBu, +4dBu, and Mic |
| Channel LED Indicators | Signal Present and Clip, per channel |
| Metering | LEDs; green: Signal Present; red: Clip; per channel |
| Maximum Output Level | +24dBu |
| Output Impedance | 226 ohms (+18dBu, +24dBu); 100 ohms (+4dBu and mic) |
| Freq. Response | 4Hz-22kHz +0.2dB/-3dB |
| THD +N | < 0.004% |
| Crosstalk | -90dB |
| Bit Error Rate (BER) | 10(-12) |
| Signal to Noise (unweighted) | 92dB typical, A/D to D/A Measured from AN-16/i to AN-16/o v.4 Output Module |
| Digital Connections | A-Net In: 1; A-Net Out: 1; A-Net Expansion: 1; Neutrik EtherCon connectors |
| A-Net Pro16 | A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable; uses unshielded Cat-5e UTP (or better) cable |
| Latency | <0.620 msec (measured from analog input to analog output) |
| Power Supply Input Voltage Output Voltage Plug Size |
External, DC, universal switching type 100-240 volts, 50/60Hz, 30VA 24 VDC, 0.5 amp 2 mm |
| Power | 24 VDC, 500mA |
| Dimensions | 19" (482.6 mm) wide x 5.75" (146 mm) deep; 1U high |
| Weight | 6.8 lbs. (3.08 kg) |
| Options | SB4 System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable |
