Overview
With its half-space unidirectional polar pattern, low-profile design, and outstanding sound quality, the PRO 44 is ideal for conference tables, podiums, lecterns and other installed-sound uses. This versatile boundary mic’s self-contained electronics eliminate the need for external power modules. The PRO 44 is equipped with a wide-range condenser element with low-mass diaphragm for superior performance.
Features
- Low profile for minimum visibility
- Wide-range condenser element with low-mass diaphragm for superior performance
- Self-contained electronics eliminate need for external power modules
- Rugged design and construction
- 25' (7.6 m) detachable cable (TA3F to XLRM-type)
Specifications
| ELEMENT | Fixed-charge back plate, permanently polarized condenser |
| POLAR PATTERN | Half-cardioid (cardioid in hemisphere above mounting surface) |
| FREQUENCY RESPONSE | 70-16,000 Hz |
| OPEN CIRCUIT SENSITIVITY | -25 dB (56.2 mV) re 1V at 1 Pa |
| IMPEDANCE | 100 ohms |
| MAXIMUM INPUT SOUND LEVEL | 114 dB SPL, 1 kHz at 1% T.H.D. |
| DYNAMIC RANGE (typical) | 86 dB, 1 kHz at Max SPL |
| SIGNAL-TO-NOISE RATIO | 66 dB, 1 kHz at 1 Pa |
| PHANTOM POWER REQUIREMENTS | 9-52V, 2 mA typical |
| WEIGHT | 2.4 oz (67 g) |
| DIMENSIONS | 2.87" (73.0 mm) maximum width, 3.56" (90.5 mm) maximum length, 0.59" (15.0 mm) height |
| OUTPUT CONNECTOR | TB3M-type |
| CABLE | 25' (7.6 m) long, with TA3F and XLRM-type connectors |
