Ashly WR-1
Dual Control Decora Wall Remote - Single Gang Box

Remote control your system from any location. This device fits in a standard wall box and accepts low gauge wire for hook-up such as Cat5 type wire. They are available in white and can be covered with a standard decora plate (not included). Labels for these devices can be made with a template. WR-1e WR-2e and WR-5e versions are available to fit standard european wall boxes.

WR-1
The WR-1 is an assignable dual potentiometer remote volume control. Each volume control is connected to a euroblock jack terminal on the WR-1 circuit board which in turn must be wired to the back panel euroblock connector labeled "0 - 5 Volt Remote Level Control" available on many Ashly amplifier and DSP products. By connecting a volume control to a specific pin the WR-1 can control the level of the associated input or output channel. For some controlled products it is possible to assign any combination of input and/or output channels to any remote level control pin using Protea NE Software. The level control is "attenuate only" meaning that the maximum setting of the control potentiometer (fully clockwise) results in 0 dB gain of the controlled channel.

Specifications:

Compatibility

Ashly Products includes: nX/nXe/nXp amplifiers
Pema amplifiers
NE multi-channel amplifiers
NE two-channel amplifiers
ne24.24M matrix processor
NE8800/4800/4400 network processors

Safety/compliance

CE, FCC, RoHS