Ashly's TRA-Series expands on the SRA's concept of "the right amp for the job." These 2RU amplifiers utilize our state of the art technology to create advanced efficient amplifiers perfect for low impedance 25V 70V or 100V installations with modest power requirements. Four models are available in two and four channel configurations with power ratings of 75W and 150W per channel @ 4 ohms 70V and 100V.
All audio controls of the TRA-Series amplifiers are on the rear panel or internal. A six-step LED meter for each channel lets you monitor all levels. All TRA amplifiers can drive four or eight ohm loads and 70V and 100V constant voltage lines simultaneously. Output Install Sound > Install Speakers > Transformers are internally mounted. The 150W models are capable of driving 25V constant voltage lines using the direct coupled 4 ohm output.
TRA-Series amplifiers incorporate a switch-mode-power supply and Class-D amplifier circuitry providing an extremely power-efficient solution for a wide variety of low wattage applications..All TRA-Series amplifiers are convection-cooled so there's little maintenence after the installation and no annoying fan noise. Of course you get the reliability superior sonic quality and rugged construction you've come to expect from Ashly.
Features include: convection cooling extremely low noise an internally switchable 120V/240V power supply (internal) extensive protection circuitry euroblock inputs and screw terminal outputs. Front panel features include: mains power switch and an LED signal level meter indicating -24dB -18dB -12dB -6dB -3dB and clip alert for each channel. Rear panel features include: level attenuators for each channel rear panel switches to select between two choices of input sensitivity remote power turn-on/off and adjustable turn-on delay up to eight seconds.
Features:
Convection cooling
Extremely low noise
Internally Mounted Constant Voltage Install Sound > Install Speakers > Transformers
Switchable 120V/240V power supply (internal)
Extensive protection circuitry
Rear panel level attenuators for each channel
6-Step Signal Level and Clip LEDs
Euroblock inputs/Screw terminal outputs
Selectable input sensitivity
Remote power turn-on/off
Adjustable turn-on delay up to eight seconds
Specifications:
| Power Rating | Stereo @ 8 Ohms: 80W per Ch. Stereo @ 4 Ohms: 150W per Ch. Stereo @ 70V: 150W per Ch. Stereo @ 100V: 150W per Ch. |
| Damping Factor | >200, 8-Ohm load, <1kHz |
| Input Sensitivity | 1.5V |
| Input Impedance | 20 kOhms, Balanced |
| Gain | Selectable 26dB or 36dB |
| Frequency Response | 20 Hz - 20 kHz, +/-1.0dB |
| Signal-to-Noise Ratio | >105dB, 20Hz - 20kHz unweighted |
| Total Harmonic Distortion (THD) | <0.01% (8-Ohm load, 10dB below rated power, 20Hz - 10kHz |
| Input Connections | 2 x Ch.1,2 3- Pin Euroblock |
| Output Connectors | 2 x Ch.1,2 Screw Terminals |
| Controls Front Panel | 1 x Power Switch |
| Controls (Rear) | 2 x Gain Control Knobs 4 x Delay DIP Switches 2 x 80Hz HPF On/Off Buttons 2 x Gain Sensitivity Buttons |
| Indicators | 1 x Blue Power On LED 1 x Yellow Standby LED 1 x Red Protect LED 2 x Red Clip LED's 6 x Green -24/-18/-12dB Signal LED's 4 x Yellow -6/-3dB Signal LED's |
| Cooling | Convection-cooled |
| Power Consumption | 37.5W (1/8 Power Pink Noise @ 4 Ohm) Typical Current: Idle: 0.35A 1/8 Power: 1.10A |
| Dimensions | 19 x 3.5 x 11" (483 x 89 x 279.4mm) |
| Weight | 19.5 lb (8.8 kg) |
| Specialties | Adjustable Turn-On delay Switches Convection Cooling Switch-Mode Power Supply |
| Packaging Info | |
|---|---|
| Package Weight | 27.0 lb |
| Box Dimensions (LxWxH) | 24.5 x 17.8 x 4.75" |
