Connecting and controlling an audio processor for networked systems has now been simplified with Ashly's NE-Series ne4400 ne4800 and ne8800 digital signal processors. These Network Enabled (NE) processors offers ease of use setup and control using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed.
Standard units are analog line input/output format of 4x4 (4400) 4x8 (4800) and 8x8 (8800) with four option bays supporting network audio AES/EBU and mic input options. The DSP signal processing library is extensive and utilizes multiple SHARC 32-bit/96kHz processors with sample rates of either 48 KHz or 96 KHz. Processing blocks include an 8x8 matrix mixer a full array of variable Q graphic and parametric equalization crossover filters to 8th-order Butterworth Bessel Linkwitz and Notched-Linkwitz an extremely advanced automatic feedback suppressor autolevelers compressors matrix duckers limiters frequency-keyed noise gates time delay up to 1365 ms on every channel sinewave pink noise and white noise generators.
All programming is accomplished using standard 10/100 Ethernet or RS-232 protocol and Ashly's Protea NE Software on a PC platform. Hot-plug software control allows you to plug any function into any channel block even when running live audio with no latency or recompiling necessary. Automatic DHCP network IP configuration reduces network set up time. No front panel controls and multi-level software security with password access assures you a tamperproof audio system.
Additional features include: network audio routing at matrix mixer to inputs from outputs or in/out of matrix mixer 8 link groups on most functions automatic master clock switchover between network word clock AES/EBU and internal clock a high-performance analog audio path - dynamic range exceeding 114 dB support of Ashly digital remote controls programmable 8 channel 5V logic input or output control 8 channels of 0 to 5V analog level control word clock input and output and a front panel full meter bridge with mute keys.
Available hardware options are: 4-channel mic/line input option with software controllable gain and phantom power CobraNet network audio input and output EtherSound network audio input and output AES/EBU digital audio input and AES/EBU digital audio output.
Features:
• Three models - 4x4 4x8 and 8x8 format
• 10/100 Ethernet and RS-232 computer interface Is standard
• Extensive DSP Available
• Easy and intuitive user interface
• 24-bit A/D-D/A audio resolution
• 32-bit SHARC DSPs
• Sample rates of 48 KHz and 96 KHz
• Hot-plug software control
• Automatic DHCP network IP configuration
• Butterworth Bessel Linkwitz and Notched-Linkwitz filters
• Advanced automatic feedback suppression
• Word clock input and output
• Euroblock connectors for audio preset recall DC remote level control and data in/out
• Four dedicated remote controls for Level Logic I/O and Programmable Functions
• Third party control friendly
• Input and output metering
• Multi-level Security
• Five year worry-free warranty
Rear panel:
• 10/100 Ethernet port
• RS-232 port
• Euroblock inputs
• Euroblock outputs
• Four option bays
• Word clock in and out
• Remote level control
• Logic I/O
• Data in and out ports
• On/off switch
Accessories
• WR-1 2-ch Level Control
• WR-2 Four Position Switch
• WR-5 Programmable Selector
• RD/RW8C 8-ch Level Control
Specifications:
- Compatibility
- Microsoft Windows 8, 7 (Vista/XP) 32 & 64 bit systems
- Digital: Ethernet Control
- Standard RJ45 10/100 Ethernet w/ auto-configuration
- Digital: RS-232 Control
- Standard female Dsub9 jack
- Digital: 4-pin Serial Data Remote
- 4-pin Euroblock for phantom-powered bi-directional remotes
- Digital: Logic Inputs
- 9-pin Euroblock for (8) assignable 5V logic inputs
- Digital: Logic Outputs
- Shared with logic inputs. +12V at 10mA output high, 100mA input low
- Analog: Remote Attenuators
- 10-pin Euroblock for (8) assignable 0-5VDC passive remote attenuators
- Samples Rates
- 48kHz, 96kHz
- DSP Processing
- 32-Bit floating-point SHARC processor array
- Audio Input Source Selection
- Selectable in adjacent channel pairs from analog, AES3, or network inputs
- Network Audio
- CobraNet and Dante
- Network Audio Routing
- Selectable between input/output or internal to matrix mixer
- Digital Audio/Output Jitter
- 0.5nS average, 1.0nS peak
- WR-1
- 2-Channel Level Control
- WR-1.5
- Level Control Only
- WR-5
- Programmable Button Controller
- neWR-5
- Programmable Network Button Controller
- FR-8
- 8-Channel Network Fader Remote
- FR-16
- 16-Channel Network Fader Remote
- Ashly Remote
- Remote Application for Apple iPad
- Sonic Performance: Frequency Response
- A > D: 20Hz-20kHz +/- 0.1dB
D > A: 20Hz-20kHz +/-0.25dB
A > A: 20Hz-20kHz +/-0.25dB - Sonic Performance: Dynamic Range
- A > D: 20Hz-20kHz > 115dB (Unweighted)
D > A: 20Hz-20kHz > 114dB (Unweighted)
A > A: 20Hz-20kHz > 115dB (Unweighted) - Sonic Performance:Distortion,THD & Noise
- A > D: 1kHz, +20dBu Analog (-1dBFS digital) A: +20dBu Analog (-1dBFS digital) A: 1kHz, +20dBu Analog (-1dBFS digital) D: 1kHz, +20dBu Analog (-1dBFS digital) < 0.00001%
- Sonic Performance: Latency at 48kHz
- A > D: 1.42ms
D > A: 0.90ms
A > A: 2.21ms
D > D: 0.10ms - Sonic Performance: Latency at 96kHz
- A > D: 0.71ms
D > A: 0.45ms
A > A: 1.11ms
D > D: 0.05ms - Word Clock: Input/Output Type
- 75Ohms BNC
- Word Clock: Lock Range
- 48kHz +/- 4%, 96kHz +/- 4%
- Word Clock: Input Impedance
- Selectable 75 Ohms or high impedance
- Word Clock: Input Voltage Range
- 1.0Vpp-7.0Vpp
- Word Clock: Output Impedance
- 75Ohms
- Word Clock: Output Level
- 5.0Vpp nominal, unterminated
- Analog Line/Mic: Input Type
- Active balanced Euroblock
- Analog Line/Mic: Input Impedance
- 20kOhms
- Analog Line/Mic: Max Input Level
- +20dBu
- AES3 Digital: Input Type
- Transformer balanced female XLR
- AES3 Digital: Input Impedance
- 110Ohms
- AES3 Digital: Max Input Level
- 7.0 Vpp
- Servo-Balanced Euroblock
- Output Impedance: 20 Ohms
Maximum Output Level: +20dBu - AES3 Transformer Balanced Male XLR
- Output Impedance: 110 Ohms
Maximum Output Level: 5.0Vpp - Rear Panel: Connectors
- 10/100 Ethernet port, RS-232 port, Euroblock inputs/outputs, Four option bays, Word Clock in/out, Remote level control, Logic I/O, Data in/out ports, On/off switch
- Environmental Temperature
- 40 deg. F to 120 deg. F / 4 deg. C - 49 deg. C (noncondensing)
- Power Requirements: AC Mains
- 90-240VAC, 50-60Hz, 70W Max
- Power Cable Connector
- 15A Edison 3-Prong IEC
- Input Source Select Options
- Analog, Auto (Net, AES3, Analog)
- Brick Wall Limiter
- Threshold: -20dBu to +20dBu
Ratio: Infinite
Attack: 0.2ms/dB to 50 ms/dB
Release: 5ms/dB to 1000ms/dB - Compressor
- Threshold: -20dBu to +20dBu
Ratio: 1.2:1 to infinite
Attack: 0.2 to 50ms
Release: 5ms/dB to 1000ms/dB
Detector: Peak/Average
Attenuation Bus: 4 available
Metering: In, Out, Attenuation, Graphica - Autoleveler Controls
- Target Level: -40dBu to +20dBu
Action: Gentle, normal, aggressive, user defined
Maximum Gain: 0dB to +22dB
Ratio: 1.2:1 to 10:1
Threshold Below Target: -30dB to 0dB
Gain Increase/Decrease Rate: 5ms/dB to 1000ms/dB
Hold Time: 0-6 sec - Ambient Noise Compensation: Output Only
- Maximum Gain: -20dB to +20dB
Min/Base Gain: -40dB to -1dB
Gain Change Rate: 0.2s/dB to 20s/dB
Link Group: 8 available
ANC Input Channel: 1-2 or 1-4
Noise Threshold: -40dBu to +20dBu
Program/Ambient Gain Ratio: 0.3:1 to 3:1
Metering: Input level, Attenuation, Average noise - Ducking
- Trigger Threshold: -80dBu to +20 dBu
Ducking Release: 5ms/dB to 1000ms/dB
Ducking Depth: 0dB to -30dB, -Infinity
Enable Ducking at Matrix Mixer: Yes
Metering: Input - Gate
- Threshold: -80dBu to +20dBu
Range: off, 100dB to 0dB
Attack: 0.2ms/dB to 50 ms/dB
Release: 5ms/dB to 1000ms/dB
Metering: Key Signal, Gate LED, Graphical - Advanced Gate Controls
- Key Engage Enable: Yes
Key Frequency: 20Hz to 20kHz
Key Bandwidth: 0.016 to 3.995 Octave - Gain
- Gain (with/without VCA): -50dB to +12dB, off, polarity invert
Digital VCA Groups: 4 available
WR-5 (neWR-5) Remote Gain: 0 to -50dB, Mute
Remote RD8C Gain: Enable per channel, 0dB to -Infinity - EQ: 31-Band Graphic
- Filter Type: Constant Q or Proportional
Bandwidth: 0.499oct to 0.25oct - EQ: Parametric 2,4,6, or 10 Band
- Frequency: 20-20kHz
Level: -30dB to +15dB
Q Value: 0.016 to 3.995 Octave - EQ: Hi/Low Shelf 6/12 dB/oct
- Frequency: 20Hz-20kHz
Level: -15dB to +15dB - EQ: All Pass
- Frequency: 20Hz-20kHz
- EQ: Variable Q HP/LP
- Frequency: 20Hz-20kHz
Q Value: 3.047 to 0.267 - EQ: Notch/Bandpass
- Frequency: 20Hz-20kHz
Bandwidth Range: 0.016 to 3.995 oct. - Feedback Suppressor
- Filters: 12
In/Out per filter: Yes
Filter Modes: Float, Restricted, Manual, Lock
Filter Type: Notch, Parametric
Filter Frequency Range: 20Hz to 20kHz
Parametric Filter Level: +15dB to -30dB
Filter Bandwidth: 0.016 to 3.995 Octave
Detector Sensitivity: 5 levels
Float Time: 5 seconds to 24 hours (Only available with 48kHz sampling rate (inputs only)) - Crossover
- Bessel & Butterworth Filters: 12/18/24/48 dB/oct
Linkwitz-Riley Filter: 12/24/48 dB/oct
Notched Linkwitz-Riley: 4th Order, 8th Order
Frequency: Off, 20Hz-20kHz (2 Way, 3 Way, 4 Way Crossover & High Pass/Low Pass Filters) - Delay (at 48kHz Sampling Rate)
- Speaker Delay: 0-58.65ms
Delay: 0-1365.31ms (Input Time, Distance & Temperature) - Delay (at 96kHz Sampling Rate)
- Speaker Delay: 0-29.32ms
Delay: 0-682.65ms (Input Time, Distance & Temperature) - Audio Metering Tool
- Range: -60dBu to +20dBu
Increments: 1dB
Peak Hold Indicator: Yes - Signal Generator Tool:
- Signal Level: Off, -50dBu to +20dBu
Sine Wave Frequency: 20Hz-12kHz (Pink noise, White noise, Sine wave) - Matrix Mixer
- Gain (0.5dB increments): Off., -50 to +12dB
Mute: Input
Auto-Mixer: Automix assign per input
Global Auto-mixer Response: 0.01sec to 2sec
Enable Ducking at Mixer: Yes
Ducking LED: Per channel if enabled
Metering: Level, auto-mixer level - Processors
- Input A/D, Output D/A: 24 bit
DSP Processors: 32-bit floating point
Sample Rates: 48kHz, 96kHz - Safety/Compliance
- cTUVus, CE, FCC, RoHS
- Dimensions (L x H x D)
- 19 x 3.5 x 8.5" / 482.6 x 88.9 x 215.9mm
- Weight
- 10.3lbs / 4.67kg