1.1 DMX Control Mode  

DMX is short for Digital Multiplex. This is a universal binary language used as a form of communication between intelligent fixtures. Each dip switch represents a binary value.

Dip Switch 1 address equals 1
Dip Switch 2 address equals 2
Dip Switch 3 address equals 4
Dip Switch 4 address equals 8
Dip Switch 5 address equals 16
Dip Switch 6 address equals 32
Dip Switch 7 address equals 64
Dip Switch 8 address equals 128

Dip Switch 9 address equals 256

In this mode, the dip-switch 10 is flipped to the "ON" position. And this switch sometimes used to activate some fixture special functions.

1.2Stand Alone Mode    
The Stand Alone Mode is engaged in by flipping the dip-switch 10 to the "OFF" position. And this mode includes sub-modes with many functions, such as fade time, chasing speed, built-in programs.

1.2.2 Adjusting chase speed
1) The Stand Alone Mode enables;
2) Thus, flip the dip-switch 4,5 & 6(12-way Function Dip Switch)to adjust a desired level for chasing speed.

1.2.3 Selecting Built-in programs
1) The Stand Alone mode enables;
2) Thus, flip the dip-switch 7,8 & 9 (12-way Function Dip Switch) to select the desired program.

1.3 Loading Mode Setting    
In this function, user can flip the dip-switch 11 & 12(12-way function Dip Switch) to select the desired Output
Loading Mode.

1) SINGLE Output  Mode,    one output with R.G.B.A which was controlled by DMX channel 1, the output of
R.G.B.A is identical.

2) COLOR Mode   , one output which color of  R.G.B. Was controlled by one channel 1.No output for A.

3) RGB Mode   , one output which RGB was controlled by 3 DMX channels separately. No output for A

4) RGBA Mode  , one output which R.G.B.A was controlled by 4 DMX channels separately.