Overview

The EMX7 powered mixer was designed for musicians, performers, or public speakers who put a premium on sound quality and convenient operation, and are ready to take their sound reinforcement to the next level. Add speakers and a microphone and you have a fully functioning, extremely portable, and reliable sound system with all the tools you need to mix, process, and deliver your audio just the way you want, anywhere you want.

Class-D Amplifier
The EMX7 features a built-in high-efficiency power amplifier of 2 x 710W of output power. Despite its low power consumption, this amp is capable of very high volume output, yet still remains surprisingly lightweight. It is equipped with onboard overload protection function to improve reliability and prolong component life and performance quality.

Complete Range of Input & Output Channels
The EMX5 is equipped with four mono input channels and four mono/stereo input channels, allowing up to 8 microphones and line-level devices such as keyboards and portable playback device to be connected to each channel. In addition, channel 4 can be used with Hi-Z inputs to connect instruments such as guitars or basses directly. It is also equipped with 2 AUX SEND connections for a monitoring system or external effect devices, REC OUT unbalanced RCA pin output jacks to connect an external recorder, and STEREO OUT TRS phone jacks to output the mixed stereo signal.

Onboard Feedback Suppressor
EMX7 is equipped with a Feedback Suppressor that utilizes a unique Yamaha digital technology to instantly eliminate annoying feedback with the single switch of a button, which utilizes a seven-band notch filter.

Speaker Processor and Preset
The speaker processor function allows you to select an appropriate setting to match the particular speakers you’re using. It features presets specifically tuned for each model in Yamaha’s extensive lineup of passive speakers, including CBR, Club, A and R series. This allows users to optimize speaker performance and save even more time during system setup. It also includes a bass boost function that can be enabled to significantly bring out the lower frequencies.

3-band Equalizer Control
With individual knobs you can adjust the [HIGH], [MID], and [LOW] audio frequencies. You can operate instantly turning the control to amplify (boost) and attenuate (cut) the corresponding frequency band.

1-knob COMP
EMX5 is equipped with the popular 1-knob COMP function used in MGP and MG series models. By simply operating a single control, it is possible to get optimal compression for vocals and instruments. As the [COMP] control is turned to the right, the threshold, ratio, and output gain are adjusted simultaneously.

Comprehensive, Professional Effects and Signal Processing
EMX7 is equipped with a powerful, comprehensive DSP section that provides a total of 24 different effects that are in the same league as our famed SPX effect processor series used by professionals. It is possible to add reverb and delay effects that simulate the sound of different performance environments, such as concert halls and small clubs.

Features

• channels 1-4: mono mic and line inputs (XLR and 1/4" TRS)
• channels 5/6 and 7/8: mono mic and stereo line inputs (XLR and 1/4" TS)
• channels 9/10: mono mic and stereo line inputs (XLR and RCA)
• channels 11/12: mono mic and stereo line inputs (XLR, RCA, and 3.5 mm)
• 3-band EQ and clip lights on all input channels
• switchable 48-volt phantom power for all 8 mic channels
• one-knob dynamic compressors on channels 1-4
• switchable high-pass filters (80 Hz, 12 dB/octave) on channels 1-3
• Hi-Z switch on channel 4 for plugging a guitar directly into the mixer

Specifications

• two built-in amplifiers can power Left and Right Mains separately, or Main and Monitor
• maximum output power @<10% THD+N: 710 watts x 2 at 4 ohms, 500 watts x 2 at 8 ohms
• maximum output power @<1% THD+N: 600 watts x 2 at 4 ohms, 400 watts x 2 at 8 ohms
• 2 powered outputs (Speakon and 1/4" TS)
• 6 preamp outputs: Aux 1, Aux 2, Stereo Left, Stereo Right (1/4" TRS), and Rec Left and Right (RCA)
• Aux 1: prefader send can be used for outboard monitor
• Aux2/EFX: postfader send can be used for outboard effects or monitor
• built-in SPX digital processor with 24 effects including reverb, chorus, flanger, delay, pitch shifter, and other multi-effects
• 9-band graphic equalizers on Main and Aux channels
• digital processing includes power protection, limiting, feedback suppression, speaker-matching, and bass boost