Williams Sound FM T55

Williams Sound FM T55

Williams Sound FM T55

Williams Sound FM T55

FM Plus-Large-area Dual FM and Wi-Fi base transmitter with network control, OLED display, DSP audio processing, analog XLR input and line output.

SKU: WS-FM T55
MSRP: $1,340.00
MAP: $1,340.00

Overview

Replaces the PPA T45 and PPA T45 NET

The new FM+ integrates professional WaveCAST Wi-Fi audio server technology into a Williams Sound FM assistive listening system.  End users can now listen with either an FM receiver or with their own smartphone (via the WaveCAST Listening App).  Along with this flexibility comes exceptional audio quality, as the FM+ is built on a professional digital audio (DSP) platform.  Added plus: Its optional Dante interface provides integrators with a full audio networking solution.

The new FM+ is designed to support those who want to use their own smartphones and headphones for a more discreet assistive listening experience.  Simplicity is also available for those who want a more traditional assistive listening system with a dedicated FM receiver and headset.  Venues no longer need to choose between providing FM or Wi-Fi assistive listening systems.  FM+ supports both the new iOS and Android WaveCAST Apps -- in addition to all of the current and legacy Williams Sound FM receivers operating on the 72-76 MHz bandwidth.

This version is not Dante compatable

The FM Plus uses the WaveCAST app  to provide an easy-to-use, intuitive user interface. It is available in iOS or Android. Listeners easily select channel and volume level once their personal device is connected to the Wi-Fi network. The app does not work on FM Broadcasts.

Specifications

Dimensions 8.45" W x 8.25" D x 1.72"H (21.5 cm x 21 cm x 4.4 cm)
Color Black/Silver with silver legends on the front, white legends on the back
Rack Mount Standard 19” Rack, one EIA rack space high, 1/2 space wide
1–2 units can be mounted in a single rack space with optional RPK 005 (single) or RPK 006 (double) Rack Mount Kits
Power Supply Desktop Style Transformer (TFP 062); Input: 100-240 VAC, 50/60 Hz. IEC Line Cord; Output: 24 VDC, 750 mA, 18W. 2.5mm ID center positive barrel connector
Power ON Indicator Push On/Push Off latching power button, backlit green indicates power ON, backlight off indicates power OFF, fading from bright to dark indicates Sleep Mode.
Temperature Range Operating: +32° F to +104° F (0° C to 40° C); Storage: -4° F to +158° F (-20° C to 70° C)
RF Section
Operating Frequencies 72.1-75.9 MHz , 17 wideband channels (selectable)
Frequency Accuracy ± 2 ppm stability, 0-50Ëš C
Deviation ± 75 kHz maximum
Pre-Emphasis 75 microsec
RF Field Strength Does not exceed 80 mV/m at 3 m
Compatible Antennas ANT 005, ANT 021, ANT 024, or ANT 025
Transmission Range Up to 1000 ft (304 m) with ANT 005 coaxial antenna mounted on rear chassis connector
RF Outputs (1x) #10-32 stud connector in center of unit (pcb mounted)
(1x) F-connector on rear chassis
RF Transmit Indicator 1 Green LED, indicates RF "On Air"
Audio Section
Audio Processor Functions DSP based; Compression: 1:1, 1.5:1 or 2:1; High-pass and Low-pass Filter Frequency control
Frequency Response 31 – 16000 Hz, ±3 dB (Music Audio Preset)
Signal-to-Noise Ratio Greater than or equal to 74 dB Transmitted RF
Total Harmonic Distortion Less than 0.25% @ 1 kHz (RF output)
Common Mode Rejection Greater than 57 dB @ 1 kHz, Mic or Line
Audio Inputs (1x) Combination 3-pin XLR, 1/4" (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power
Audio Input Gain Adjust In menu, adjustable to 0 to -50 dB, in 1dB steps
Phantom Power 14.4 VDC applied through 2.2 kOhms resistors to analog combo jack: Pin 2 and Pin 3 on XLR jack, or tip and ring on 1/4" TRS jack
Audio Level Indicators 10-LED array that reads -18 to +9 dB at 3 dB intervals. 7 Green, 2 Amber, and 1 red LED. Green LEDs indicate normal operating audio level peaks, Amber LEDS indicate close to overload peaks, Red LED indicates overload peaks
Headphone Output 1/4" TRS stereo jack, mono signal, 15.7 mW, maximum in 33 Ω (level adjustable in menu 0 to -40 dB in 2 dB steps)
Line Output RCA jack (black), -10 dBV (.32 VRMS); Output impedance 100 ohms
Input Levels (Bal or Unbal) (at Audio Input Gain = 0dB)
Nominal (1st Amber LED) Overload Warning (Displayed on Screen)
Microphone
-55 dBV (1.7 mV RMS) -15 dBV (180 mV RMS)
Line
-25 dBV (55 mV RMS) +16 dBV (6.3 V RMS)
Ethernet RJ-45 on back of unit supports CAT 5e cable lengths up to 328 feet (100 meters); 10/100 Base-T IEEE 802.3 compliant, unique MAC address
Operating Systems Apple iOS 9.1 or newer; Android 6.0 or newer; Blackberry and windows not supported
Approvals FCC, RoHS3, WEEE, Industry Canada, CE, PSE, RCM, CB Scheme
Warranty 2-year parts and labor