Overview
The DL102 Loop amplifier provides a practical solution for a user to hear with their T-coil enabled hearing device in small areas such as counters and service desks. Audio is wired into the DL102 amplifier via a line-level input or microphone. Audio is fed from the amplifier through the loop wire in the area where a T-coiled hearing device can pick-up the audio. With no direct connection between the user and service personnel, users can hear effectively when using the T-coil in their customized hearing devices. This loop system is supplied with a loop pad and a spool of wire.
Includes
- DL102 amplifier
- Power supply
- AC line cord
- Loop notice stickers
- Set of adhesive cable clips
- MIC 105 - Microphone
- PLW 037 (120ft Spool of wire)
- PLM 001 - Loop Pad
Specs
DL 102 SY1
|
Audio Input: |
3 (1 microphone or line input, isolated line input, Mic) |
|
Connector Type: |
3.5mm jack, Mic-2 pole line in, 3 pole line in, Mic in |
|
Power Supply: |
12V DC 1.5 A output |
|
Power Voltage: |
100-240VAC, 50/60Hz - 2.0A Input |
|
Dynamic Range: |
> 60 dB |
|
THD: |
THD+N < 0.5% - 1kHz |
|
Amplifier Type: |
Constant current |
|
Loop Resistance: |
0.1 Ω to 1.0 Ω |
|
Current Output: |
2A RMS at 1kHz (2.8 APK) |
|
Protection: |
Thermal, short-circuit and start |
|
Dimensions: |
3.9” x 2.3” x 1” (100mm x 60mm x 25mm) |
|
Amplifier Weight: |
0.48 lbs (218 g) |
PLM 001
| Lead Wire Length | 16 ft / 5 m |
| DC Resistance | 1.3 Ohms |
| Weight | 0.5 lbs / 225 g |
| Pad | 14 in / 0.4 m square |
| Wire In Pad | 10-turn loop |
PLW 037
|
Length |
120ft |
|
Spool Dimensions: |
6.5"Dia |
|
Spool Weight: |
9.8 lbs |
|
Color/Material: |
White |
