Williams Sound IR SY21 D

Williams Sound IR SY21 D

Williams Sound IR SY21 D

Williams Sound IR SY21 D

Commercial-grade, large-area infrared transmitter system with array.

SKU: WS-IR SY21 D
MSRP: $6,430.00
MAP: $5,787.00

Overview

Commercial-grade, large-area Dante infrared system with IR+ transmitter, 2 emitters and array.

System Includes

(1) IR M1 D infrared modulator with Dante input

(2) IR E4 emitters

(1) IR A4 array

(4) WIR RX22-4N receivers

(2) BAT KT6 dual bay chargers

(4) EAR 022 earphones

(1) IDP 008 ADA wall plaque

Specifications

IR M1

Dimensions: 19” (W) x 1.75” (H) x 8.2” (D)
(48.3 cm x 4.5 cm x 20.8 cm)
Weight: 5.2lb. (2.4 kg)
Color: Black
Rack Mount: Single Rack Unit
Power Supply: International Desktop Supply
Input: 36 W, 110-240 VAC 50-60 Hz
Output: +48VDC, 0.75A center-positive
Power Switch: Rocker switch with LED
Signal to Noise Ratio: 67 dB (typical)
Modulation: FM Wideband, +50kHz deviation, 50uS pre-emphasis
Carrier Frequency: Selectable, 2.3/2.8 or 3.3/3.8MHz
Frequency Response: 40 to 16,000Hz, +1 dB, -3dB, electrical response
Total Harmonic Distortion: Less than 2%, electrical response
Audio Processor Functions: DSP based; Compression 1:1, 1.5:1, or 2:1; High-pass and low-pass filter frequency control
Auto Carrier Shut-Off: Adjustable timer shuts off carrier when no audio is present. Adjustable through webpage.
Infrared Test LED: Dual IR LED for receiver testing, monitoring, and audio signal testing.
Audio Input: (2x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power
Dante: Optional
Internal Test Tone: 400 Hz internal test tone selectable as audio input source for setup and diagnostics
Remote Configuration: Available through embedded website
Headphone Output: (2) 1/4″ headphone jacks on front panel for monitoring CH A and CH B audio inputs
Emitter Output Jack: Four RJ-45 ports for CAT5e cables; provides +48VDC Power, RS-485 communication, and Baseband signals for IR transmission.
Operating requirements: 0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere
Approvals: CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI
Warranty: 2 years on Modulator, 90 days on accessories

IR E4

Dimensions: 7.5” (W) x 1.4” (H) x 3.6” (D)
(19.1 cm x 3.6 cm x 9.1 cm)
Weight: 0.8 lb (362 g)
Color: Black
Power: 48 VDC supplied by IR M1 via CAT 5e cable.
Coverage Area: Up to 18,000 square feet in single channel mode
Connectivity: +48VDC Power, RS-485 communication, and Baseband signals for IR trasmission are all provided via a single CAT5e cable inserted into an RJ-45 jack from the IR M1.
Operating requirements: 0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere
Approvals: CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI
Warranty: 2 years on Emitter; 90 days on accessories

CHG 520

Dimensions: 12″L x 6.25″W x 1.5″H (30.48 cm x 15.875 cm x 3.81 cm)
Weight: 13.6 lbs
Color: Black metal and plastic
Power Supply Input: 120 VAC
Power Supply: 100-240V / 12VDC TFP 043
Unit Capacity: 5 Units
Indicators: Individual Charging Indicators: Red LEDs
Warranty: 1 year (90 day warranty on cables and power supply)
Approvals: WEEE, RoHS, CE, FCC, CANADA, RCM, VCCI

IR RX20

Weight: 1.6 oz
Material and Color: IR Transparent polycarbonate, black
Battery Type: LiPo
Battery Life: 8 hours
Battery Charger: CHG 520
Operating Temp: 32-122° F (0-50° C)
Range: Up to 15,000 sq. ft. in single channel mode with IR T2 transmitter
Operating Frequency: 2.3 MHz or 2.8 MHz or stereo
Frequency Response: 100 Hz to 12 kHz, ± 3 dB
Signal to Noise Ratio: 60 dB at 10 m
Controls: Volume control thumbwheel;3-position selection switch (2.3 MHz, 2.8 MHz, stereo), Off/on slider for power
Acoustic Output: 120 dB MAX SSPL90 with 2 cc coupler
Compatibility: Compatible with 2.3 MHz and 2.8 MHz IR transmitters
Headphone Jack: 3.5mm stereo
Ear pads: EAR 089
Approvals: CE, RoHS, FCC, Canada, RCM, VCCI, WEEE
Warranty: 5 years (90 days on battery)