Overview
Chassis connector with black chromium plating, 4 solder contacts, 1 LC-Duplex feedthrough socket and 1 shell ground contact (for SMPTE cable shield), waterproof acc. to IP65 ingress protection in mated condition with SCDP-*.
The chassis connector acts as a "feed-through" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection.
Not compatible to SMPTE 304M standard. Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage.
Features
- Suggested OEM equipment connector due to LC front compatibility
- Designed as feedthrough with automatic sealing shutter
- Shutter with silicone gasket protects optical connection from dust and dirt
- Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage
- Accommodates standard LC connectors on the rear for simple installation
- Connection on the front side either by rugged opticalCON or standard LC connector
- The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations
- IP65 ingress protection in mated condition with SCDP-*
- Color coding with SCDP-* according to ANSI/TIA-568.3-D Standard:
Multimode - black
Single mode PC - blue
Single mode APC - green
Specifications
Product |
|
Title |
NO2-4FDW-1-A |
Gender |
female |
Electrical |
|
Contact resistance |
< 7 mΩ |
Dielectric strength |
1,5 kVdc |
Insulation resistance |
> 2 GΩ (initial) |
Rated current per contact |
6 A |
Rated voltage |
< 50 V (1) |
Ground contact |
Faston 2.8 x 0.5 (soldering possible) |
Mechanical |
|
Insertion force |
< 45 N |
Withdrawal force |
< 45 N |
Lifetime |
> 5000 mating cycles |
Locking force |
1000 N |
Wiresize |
|
Locking device |
Push-Pull |
Mounting direction |
Front mounting |
Chassis shape |
D |
Material |
|
Contacts |
Bronze (CuSn6) |
Insert |
Polyamide (PA 6, PBT 30 % GR, PBT 50 % GR) |
Shell |
Zinc diecast (ZnAl4Cu1) |
Shell plating |
Black chromium |
Split sleeve |
ceramics |
Environmental |
|
Temperature range |
-40 °C to +75 °C |
Optical |
|
Insertion loss |
< 0.4 dB / connection |
Optical connector |
LC-Duplex Feedthrough |