Whirlwind MIP2S
This product accepts stereo RCA or 3.5mm TRS or 1/4" unbalanced inputs. (Stereo inputs are summed to mono, only use one type at a time.) The signal is converted with a Whirlwind DImax transformer to Low-Z mic level and is output via screw terminals. A 20 dB pad is provided to attenuate hot inputs and a ground lift is provided to break the ground connection from the input to the output.
Whirlwind
Media Input Plate - Inputs: 3.5mm TRS, dual RCA, 1/4" TS; Output: balanced screw terminal; ground lift, pad, 1-gang, black
Whirlwind
Headphone - Amplifier, under-counter, balanced XLRF mono input, XLRM loop-thru, 3.5mm & 1/4" TRS output, 23dBV variable gain
Whirlwind
Splitter - Contractor , SPC83 wired for external 48V supply [will not pass phantom power from console - requires DCSP1]
Whirlwind
Cable - Instrument, Classic, metal ends, 25', Accusonic+1, w/ 1 right angle male
Whirlwind
Headphone - Interface, stereo line in, XLR mic in, level controls, 1/4" TRS and 3.5mm headphone jacks, latching mic switch, cough switch, TB switch
Whirlwind
Headphone - Interface, stereo line in, XLR mic in, level controls, 1/4" TRS and 3.5mm headphone jacks, latching mic switch, cough switch, TB switch
