Turbosound TBV118L-AN-UL

Turbosound TBV118L-AN-UL

Turbosound TBV118L-AN-UL

Turbosound TBV118L-AN-UL

18" Powered Subwoofer with Klark Teknik DSP Technology and ULTRANET Networking

SKU: TS-TBV118L-AN
MSRP: $3,199.00

Overview

BERLIN TBV118L-AN

The TBV118L-AN is a compact powered single 18" 3,000-Watt front-loaded subwoofer that is ideally suited for a broad range of speech and music sound reinforcement applications in both fixed, portable and touring audio systems. Designed to work individually without a controller, the TBV118L-AN provides optimal performance for FOH, offstage fill, stereo in-fill or distributed fill applications in a wide range of venues including nightclubs, concert halls, houses of worship, and more.

Custom-Engineered Drivers

TURBOSOUND is recognised the world over for designing and building some of the most iconic loudspeakers and subwoofers. We take meticulous care and pride in maintaining that reputation by utilising only drivers designed specifically for each application – it’s what sets us apart from the competition. The TBV118L-AN features a carbon fibre loaded 18" neodymium low frequency driver that utilises a dual voice coil design for high power capacity and extended low frequency output. For its size and operating bandwidth, the TBV118L-AN delivers extremely high and virtually distortion-free output for world-class low frequency performance that will stand the test of time.

Class-D & Massive Power, Perfect Sound

Equipped with a very efficient and lightweight KLARK TEKNIK Class-D power amplifier, the TBV118L-AN provides an impressive 3,000 Watts of output power in a highly portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency and eliminating the need for heavy power supplies and large heat sinks.

Onboard DSP

A high degree of control over the loudspeaker system's performance is managed by a sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ and transparent limiting for the utmost punch and definition at high output levels – and long-term reliability.

ULTRANET Connectivity

ULTRANET connectivity is provided by two locking etherCON * connectors. Up to 16 independent channels of 24-bit digital audio and control data are transmitted via a single CAT5 cable between compatible digital devices – including mixers, I/O stage boxes, powered loudspeakers and personal monitoring systems. Simplified cable routing and ease of setup translate directly into significant time saved during installation.

Intuitive User Interface

On the rear panel of the amplifier module, the user interface's LCD display and single rotary encoder provide intuitive access to: position compensation, user EQ control, subwoofer integration and signal routing features. In addition to the balanced XLR input, an XLR output is provided for daisychaining more active subwoofers or for use with active loudspeakers. An onboard USB port provides access for remote control of the TBV118L-AN via a free PC computer software download from turbosound.com – as well as convenient DSP firmware updates.

Front Loaded Enclosure Design

Front loaded enclosures provide an optimal combination of low frequency extension, bass articulation and temporal accuracy for high impact sound reinforcement applications. The low distortion bass reflex port design utilised in the TBV118L-AN reinforces the bass musical instrument frequencies and on board DSP processing ensures an effective acoustic transition for use with TBV123-AN active line array elements. For low-frequency bass extension, the recommended cabinet ratio consists of one TBV118L-AN subwoofer per 3 TBV123-AN elements. For reverse cardioid subwoofer configurations, multiples of three TBV118L-AN enclosures are recommended with two front-firing enclosures and one rear-firing enclosure.

Plywood Construction

Finished in a highly durable semi matt black paint, the cabinet is constructed from 18 mm (3/4") plywood with a rugged powder coated perforated steel mesh grille backed with reticulated foam, a 20 mm threaded pole mount to support satellite speakers, and a durable handle for easy transport. The TBV118L-AN includes integral suspension hardware for efficient array configuration and aiming, plus multiple internal M10 mount points that allow eyebolt suspension in any orientation. Mains input and output link power connectors are Neutrik powerCON.

Acoustic Simulation Tools

EASE GLL files are provided for EASE Focus Acoustic Simulation Software, which is available for free download. This allows accurate calculation of both acoustic coverage and suspension pick point selection for tilting and aiming the array at the desired angle.

Features

  • Front loaded powered subwoofer for touring, portable and installation applications
  • 3,000 Watt power featuring KLARK TEKNIK Class-D technology
  • KLARK TEKNIK Digital Signal Processing for total system control
  • ULTRANET digital audio networking connects to mixers and other sources
  • Carbon fibre loaded 18" neodymium low frequency driver
  • Dual voice coil design for high power capacity and extended low frequency output
  • Fully featured user interface with LCD display for ease of navigation
  • PC remote control software downloadable at turbosound.com
  • Low distortion bass reflex port design
  • 18 mm (3/4") plywood enclosure with hard wearing semi matt black paint finish
  • Integral suspension hardware for efficient array configuration and aiming
  • Multiple M10 mount points allow eyebolt suspension in any orientation
  • Rugged powder coated perforated steel mesh grille
  • 20 mm threaded pole mount to support satellite speaker
  • Durable handles for easy lifting and carrying
  • Mains input and link output on Neutrik powerCON connectors

Specifications

Amplifier

Maximum output power

3000 W

Type

Class-D

Protection

Short circuit, thermal

Connectors

Input A / B

1 x combo jack/XLR, 1 x XLR
Sensitivity: +1 dBu
Input impedance: 40 kO balanced
Maximum input level: +18 dBu

Ultranet input/link

2 x RJ45/Neutrik etherCON

Mains Supply

Neutrik powerCON† 20A and Link 15A

Controls

DSP

Rotary push-encoder and level control buttons for Process, Setup, Exit, Enter

User DSP Functions

Factory

EQ Presets Positioning, FBQ

Display

LCD 128 x 32, blue, backlit

Delay

0 - 300 ms

Equalisation

High and low shelving EQ 2 x parametric EQ

Limiter

Zero attack input limiter

Presets

20 total presets, 19 user-definable

Crossover

Low pass L-R 24 dB/oct

Protection

Lock-out function for all settings

Ultranet Digital Network

Digital processing

A/D conversion: 24-bit, 44.1 / 48 kHz sample rate

System

16 channels
Signal, Latency: < 0.9 ms

Cabling

Cables: Shielded CAT5

Cable length

max. 246 ft / 75 m recommended

Power Supply

Current consumption

Input: 20A Max, Link output: 15A Max

Power consumption

180 W @ 1/8 max power for individual product

Voltage

USA / Canada/ Japan: 100-120 V~, 50/60 Hz
UK / Australia / Europe / Korea / China: 220-240 V~, 50/60 Hz

Enclosure

Dimensions (H x W x D)

513 x 598 x 751 mm (20.2 x 23.5 x 29.6")

Net weight

38.5 kg (84.9 lbs)

Construction

18 mm (¾") plywood

Finish

Semi matt black paint

Grille

Powder coated perforated steel

Suspension hardware

Integral Suspension System and M10 x 4 points

Accessories

TBV123-FB

Fly Bar

TBV118L-RC1

Road case for 1x TBV118L-AN

TS-PC18B-3

Protective cover for 1x TBV118L-AN

TPOLE 60-20

60 cm Lightweight Steel Pole with M20 Screw Attachment

TPOLE 90-20

90 cm Lightweight Steel Pole with M20 Screw Attachment