Turbosound NUQ152-AN-UL

Turbosound NUQ152-AN-UL

Turbosound NUQ152-AN-UL

Turbosound NUQ152-AN-UL

2500 Watt 2 Way 15" Full Range Powered Loudspeaker with Klark Teknik DSP Technology and ULTRANET Networking

SKU: TS-NUQ152-AN
MSRP: $1,299.00

Overview

NuQ152-AN

The 2 way full range NuQ152-AN is a 2,500 Watt 15" powered loudspeaker system that is ideally suited for a wide range of portable and fixed installation speech and music sound reinforcement applications. Designed to work individually without a controller, the NuQ152-AN provides optimal performance for FOH, sidefill and delay line loudspeakers, and is an exceptional choice for wedge monitoring applications. It also offers the flexibility to accommodate venue-specific requirements for install applications.

The NuQ152-AN loudspeaker features a carbon fibre loaded 15" low frequency driver with a low mass voice coil for improved transient response and an aluminium dome 1" neodymium high frequency compression driver, which is mounted on a 70° horizontal by 70° vertical dispersion low distortion waveguide.

Output power for the NuQ152-AN is provided by means of an efficient and lightweight Klark Teknik 2,500-Watt Class-D power amplifier. A sophisticated, but easy to use Klark Teknik Digital Signal Processor (DSP) provides dynamic EQ for impressive full range response at low volume levels and transparent limiting for clarity at high output levels – and for long-term reliability.

On the rear panel of the amplifier module, the user interface’s LCD display and single rotary encoder provide intuitive access to: position compensation, user EQ control, subwoofer integration and signal routing features. In addition to the balanced XLR input, an XLR output is provided for daisy-chaining more active loudspeakers or for use with active subwoofers. An onboard USB port provides access for remote control of the NuQ152-AN via PC computer, as well as DSP firmware updates.

ULTRANET connectivity is provided by two locking etherCON * connectors. Up to 16 independent channels of 24-bit digital audio and control data are transmitted via a single CAT5 cable between compatible digital devices – including mixers, I/O stage boxes, powered loudspeakers and personal monitoring systems. Simplified cable routing and ease of setup translate directly into significant time saved during installation.

Finished in a highly durable semi matte black paint, the trapezoidal cabinet is constructed from 15 mm (5⁄8") birch plywood – and includes a rugged powder coated perforated steel mesh grille. Multiple threaded rigging points are provided for suspension in any orientation. The NuQ152-FY flying yoke kit provides added flexibility in permanent install applications (available separately). The NuQ152-AN also features a 35 mm socket for standard pole mounting – plus integrated handles for convenient transport. Mains power input is provided via a Neutrik powerCON * connector.

Features

  • 2 way full range powered loudspeaker for portable PA and installation applications
  • 2,500 Watt power featuring Klark Teknik Class-D technology
  • Klark Teknik Digital Signal Processing for total system control
  • ULTRANET digital audio networking connects to mixers and other sources
  • Carbon fibre loaded 15" low frequency driver with inside/outside coil
  • Aluminium dome 1" neodymium motor compression driver
  • Low distortion waveguide provides 70° H x 70° V dispersion
  • Fully featured user interface with LCD display for ease of navigation
  • PC remote control software downloadable at turbosound.com
  • 15 mm (5/8") birch plywood enclosure with hard wearing semi matt black paint finish
  • Rugged powder coated perforated steel mesh grille
  • Integral 35 mm pole mount and handles
  • Multiple internal rigging points allow bracket mount and suspension in any orientation

Specifications

System

Frequency Response

55 Hz – 18 kHz ±3 dB
50 Hz – 20 kHz -10 dB

Nominal Dispersion

70° H x 70° V @ -6 dB points

Maximum SPL

133 dB peak

Crossover Type

Active

Transducers

1 x 15" (393.5 mm) LF driver
1 x 1" (25.4 mm) HF compression driver

Limiter

Independent HF, LF, peak and rms

Amplifier

Maximum Output Power*

2,500 W

Type

Class-D

Protection

Short circuit, thermal

Connectors

Input/link

1 x Combo Jack/XLR 1 x XLR

Ultranet input/link

2 x RJ45

Mains Supply

Neutrik powerCON 20A†

Controls

DSP

Rotary push-encoder and level control
Buttons for Process, Setup, Exit, Enter

User DSP Functions

Factory EQ Presets

Positioning, Sound mode, FBQ

Display

LCD 128 x 32, blue, backlit

Delay

0 - 300 ms

Equalisation

High and low shelving EQ 2 x parametric EQ

Limiter

Zero attack input limiter

Presets

20 total presets, 19 user-definable

Crossover

High Pass L-R 24 dB/oct

Protection

Lock-out function for all settings

Ultranet Digital Network

Digital processing  
System  
Cabling  

Power Supply

Power consumption

90 W @ 1/8 max power

Voltage (fuses)  

Enclosure

Dimensions HWD

712 x 430 x 385 mm (28.0 x 16.9 x 15.2")

Net weight

23.6 kg (52.0 lbs)

Construction

15 mm (5/8") birch plywood

Finish

Semi matt black paint

Grille

Powder coated perforated steel

Flying hardware

M10 x 8 points

Accessories

 

NUQ152-FY flying yoke for NuQ152