Overview
NuQ152
The 2 way full range NuQ152 is a switchable passive/bi-amp 2,000 Watt 15" loudspeaker system ideally suited for a wide range of speech and music sound reinforcement applications. Engineered to work in conjunction with Turbosound loudspeaker management systems, the NuQ152 provides optimal performance for FOH, sidefill and delay line loudspeakers, and is an exceptional choice for wedge monitoring applications. The symmetrical trapezoidal shape and high frequency dispersion pattern also make the NuQ152 an obvious choice for mirrored left/right monitor wedge placement.
The NuQ152 loudspeaker features a carbon fibre loaded 15" low frequency driver with an inside/outside wound low mass voice coil for improved transient response, and an aluminium dome 1" neodymium high frequency compression driver mounted on a 70° horizontal by 70° vertical dispersion low distortion waveguide. All drivers are matched with an internal passive crossover network in a reflex-loaded enclosure, and bi-amp mode can be enabled by means of a rear panel switch. The rear panel connector plate carries Neutrik speakON * NL4 connectors for input and link connections to additional enclosures.
Finished in a highly durable semi matt black paint, the cabinet is constructed from 15 mm (⅝") birch plywood – and includes a rugged powder coated perforated steel mesh grille backed with reticulated foam. Multiple threaded rigging points are provided for suspension in any orientation, or for mounting with industry standard wall brackets. An optional flying yoke allows for further flexibility in install applications (available separately). The NuQ152 also features a 35 mm socket for standard pole mounting – plus integrated handles for convenient transport.
Features
- 2 way full range loudspeaker for portable PA applications
- 500 Watts continuous, 2,000 Watts peak power
- Ideal for FOH, side fill and monitor applications
- Carbon fibre loaded 15" low frequency driver with inside/outside coil
- Titanium dome 1.4" neodymium motor compression driver
- Rotatable converging elliptical waveguide provides 80° H x 50° V dispersion
- 15 mm (5/8") birch plywood enclosure with hard wearing semi matt black paint finish
- Rugged powder coated perforated steel mesh grille
- Integral 36 mm pole mount and handles
- M10 and M8 rigging points compatible with TURBOSOUND and OmniMount brackets
- Neutrik speakON NL4 connectors for reliable long life operation
Specifications
System
| Frequency Response |
50 Hz – 18 kHz ±3 dB |
| Nominal Dispersion |
70° H x 70° V @ -6 dB points |
| Directivity Factor (Q) |
9.4 |
| Directivity Index (DI) |
9.7 |
| Power Handling (IEC) | |
| Sensitivity |
97 dB (1 W @ 1 m) |
| Maximum SPL | |
| Impedance | |
| Crossover Type |
Passive / Bi-amp switchable |
| Components |
1 x 15" (394 mm) LF driver |
Enclosure
| Connectors |
2 x Neutrik speakON NL4 |
| Wiring | |
| Dimensions (H x W x D) |
712 x 430 x 385 mm (28 x 16.9 x 15.2") |
| Net Weight |
24.4 kg (53.7 lbs) |
| Construction |
15 mm (5/8") birch plywood |
| Finish |
Semi matt black paint |
| Grille |
Powder coated perforated steel |
| Flying Hardware |
M10 x 12 points |
Accessories
|
NuQ152-FY |
