Turbosound NUQ118B-AN-WH-UL

Turbosound NUQ118B-AN-WH-UL

Turbosound NUQ118B-AN-WH-UL

Turbosound NUQ118B-AN-WH-UL

3000 Watt 18" Band Pass Subwoofer with Klark Teknik DSP Technology and ULTRANET Networking (White)

SKU: TS-NUQ118B-AN-WH
MSRP: $1,399.00

Overview

2500 Watt 2 Way 15" Full Range Powered Loudspeaker with Klark Teknik DSP Technology and ULTRANET Networking (White)

Features

  • 2 way full range powered loudspeaker for portable PA applications
  • 2,500 Watt power featuring Klark Teknik Class-D technology
  • Klark Teknik Digital Signal Processing for total system control
  • ULTRANET digital audio networking connects to mixers and other sources
  • Carbon fibre loaded 15" low frequency driver with inside/outside coil
  • Aluminium dome 1" neodymium motor compression driver
  • Low distortion waveguide provides 70° H x 70° V dispersion
  • Fully featured user interface with LCD display for ease of navigation
  • PC remote control software downloadable at turbosound.com
  • 15 mm (5/8") birch plywood enclosure with hard wearing semi matt white paint finish
  • Rugged powder coated perforated steel mesh grille
  • Integral 35 mm pole mount and handles
  • M10 and M8 rigging points compatible with TURBOSOUND and OmniMount brackets
  • Mains input on Neutrik powerCON connector

NuQ118B-AN-WH

The 3,000 Watt NuQ118B-AN-WH is a powered 18" dual ported bandpass enclosure that is optimally tuned for extended low frequency response. Designed to work individually without a controller, the NuQ118B-AN-WH provides very high output FOH performance and is ideally suited for a wide range of music and live sound reinforcement applications.

The NuQ118B-AN-WH features a powerful, double suspension 18" low frequency driver that utilizes a specialised inside/outside wound voice coil for higher magnetic density, better heat dissipation, high power handling capacity, and improved efficiency. For its size and operating bandwidth, the NuQ118B-AN-WH delivers extremely high output that is virtually distortion-free – even in the most demanding applications.

Output power for the NuQ118B-AN-WH is provided by means of an efficient and lightweight Klark Teknik 3,000-Watt Class-D power amplifier. A sophisticated, but easy to use Klark Teknik Digital Signal Processor (DSP) provides dynamic EQ for impressive low frequency response at low volume levels and transparent limiting for clarity at high output levels – and for long-term reliability.

On the rear panel of the amplifier module, the user interface's LCD display and single rotary encoder provide intuitive access to: position compensation, user EQ control, crossover alignment and signal routing features. In addition to the balanced XLR input, an XLR output is provided for daisy-chaining more active subwoofers, or for use with active full range satellite speakers. An onboard USB port provides access for remote control of the NuQ118B-AN-WH via PC computer, as well as DSP firmware updates.

ULTRANET connectivity is provided by two locking etherCON * connectors. Up to 16 independent channels of 24-bit digital audio and control data are transmitted via a single CAT5 cable between compatible digital devices – including mixers, I/O stage boxes, powered loudspeakers and personal monitoring systems. Simplified cable routing and ease of setup translate directly into significant time saved during installation.

Finished in a highly durable semi matt white paint, the cabinet is constructed from 18 mm (¾ ") birch plywood and includes: multiple M10 threaded rigging points; a 35 mm pole socket for satellite speaker mounting; integrated carry handles for convenient transport – and high impact interlocking corners for ground stacking stability. Mains power input is provided via a Neutrik powerCON * connector.

Architecture & Engineering Specifications

The loudspeaker shall be of the powered subwoofer type, consisting of one 18" (460 mm) LF driver. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±3 dB from 40 Hz to 150 Hz and within -10 dB from 33 Hz to 150 Hz. Nominal dispersion shall be “half space.” Maximum amplifier output power shall be 3,000 Watts peak, independent of limiters and driver protection circuits. Maximum SPL (peak), measured at 1 metre with music program, shall be 134 dB. Dimensions: 773 mm high x 579 mm wide x 700 mm deep (30.4" x 22.8" x 27.6"). Net weight: 57.9 kg (127.5 lbs). The loudspeaker system shall be the Turbosound NuQ118B-AN-WH . No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equalled or exceeded.

Specifications

System
Frequency Response

40 Hz – 150 Hz ±3 dB
33 Hz – 150 Hz -10 dB

Nominal Dispersion

Half Space

Maximum SPL

136 dB peak

Crossover Type

Active

Transducers

1 x 18" (460 mm) LF driver

Limiter

Peak and rms

Amplifier
Maximum Output Power*

3000W

Type

Class-D

Protection

Short circuit, thermal

Connectors
Input/link

1 x Combo Jack/XLR 1 x XLR

Ultranet input/link

2 x RJ45

Mains Supply

Neutrik powerCON 20A†

Controls
DSP

Rotary push-encoder and level control
Buttons for Process, Setup, Exit, Enter

User DSP Functions
Factory EQ Presets

Positioning, Sound mode

Display

LCD 128 x 32, blue, backlit

Delay

0 - 300 ms

Equalisation

High and low shelving EQ
2 x parametric EQ

Limiter

Zero attack input limiter

Presets

20 total presets, 19 user-definable

Crossover

Low Pass L-R 24 dB/oct

Protection

Lock-out function for all settings

Ultranet Digital Network
Digital processing  
System  
Cabling  
Power Supply
Power consumption

180W @ 1/8 max power

Voltage (fuses)  
Enclosure
Dimensions HWD

773 x 579 x 700 mm (30.4 x 22.8 x 27.6")

Net weight

57.9 kg (127.5 lbs)

Construction

18 mm (¾") birch plywood

Finish

Semi matt white paint

Grille

Powder coated perforated steel

Flying hardware

M10 x 16 points