Overview
The ML-11T is a microphone/line input module to be used in conjunction with the 900 series components and other TOA's equipment. It has a balanced microphone/line input with removable terminal block connector, phantom power supply function, and gain and tone controls.
Specifications
| Power Source | Usable power supply unit: VX-200PS 24 V DC (operational range: 20 V - 40 V DC) Two power inputs construction enables dual- redundant power supply. |
|---|---|
| Current Consumption | 1.1 A or less (maximum value in the power operating range) 0.8 A or less (when operated on 24 V DC) |
| Indication/Operation |
SX link access indicator: 2 |
SX Link
| Network I/F | 2 100BASE-TX circuits, RJ45 connector |
|---|---|
| Matrix System Specification | Bus: 16 Audio input: Max. 64 ch Audio output: Max. 256 zones Contact input: Max. 1416 Contact output: Max. 1416 Priority control: 512 steps Event log: Up to 1,000 logs per file (up to 100 files available) Failure log: Up to 100 logs per file (up to 100 files available) |
| Matrix System Configuration | Connectable SX-2100AI No.: Max. 8 units Connectable SX-2000AO/2100AO No.: Max. 32 units Connectable SX-2000CI No.: Max. 32 units Connectable SX-2000CO No.: Max. 32 units Connectable RM-200SA/SF No.: Max. 64 units (up to 8 RM-200SA per SX-2100AI) |
| Connection Cable/Device | Shielded Category 5 twisted pair cable (CAT5-STP) (Connect SX-2100AI and SX-2000AO/2100AO via the switching hub specified by TOA.) Note: This network must be made completely independent from other LAN. |
| Number of Cascaded Switching Hub | Up to 7 |
| Maximum Cable Distance | 100 m (between this unit and a Number of Cascaded Switching Hubs, or between Number of Cascaded Switching Hubs) |
LAN
| Network I/F | 1 10BASE-T/100BASE-TX circuit (selectable by automatic recognition), RJ45 connector for maintenance use |
|---|---|
| Network Protocol | TCP/IP |
| Connection Cable | Shielded Category 5 twisted pair cable for LAN (CAT5-STP) |
| Maximum Cable Distance | 100 m (between this unit and a Switching Hub, or between a Switching Hub and a PC) |
Analog Link
| Input/Output Connector | Output: 2, RJ45 connector |
|---|---|
| Connection Cable | Shielded Category 5 twisted pair cable (CAT5-STP) (1 pair of audio wire + 1 pair of control wire (CPU OFF) + 1 pair of control wire (system reset/standby) + 1 pair of connection check wire) |
| Maximum Cable Distance | Total length of analog audio link: 800 m |
DS Link
| Usable Unit | VX-2000DS |
|---|---|
| Connector/Cable | 2 interface, RJ45 Connector, Shielded Category 5 twisted pair cable (CAT5-STP) |
| Maximum Cable Distance | 5 m |
