Overview
The SR-S4LWP is a two-way line array speaker ideal for long distance sound transmission andconfigures a line array by arranging speaker elements vertically close to each other.It satisfies the water protection requirements set down in the IPX4 Standard.It can be converted into the bi-amplifier drive system by changing the internal connection.It can be used for high-impedance applications with the installation of the optional MT-S0601Matching transformer.
Specifications
Enclosure | Sealed type |
---|---|
Power Handling Capacity | Continuous program: 600 W (single-amp mode) Low 240 W, High 240 W (bi-amp mode) |
Rated Impedance | 8 Ω (single-amp mode) Low 8 Ω, High 8 Ω (bi-amp mode) |
Sensitivity | 94 dB (1 W, 1 m) |
Frequency Response | 70 Hz - 20 kHz (when recommended parameters are applied by the optional DP-SP3) |
Crossover Frequency | 3.5 kHz |
Directivity Angle | Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height) |
Speaker Component | Low frequency: 10 cm cone-type × 8 High frequency: 2.5 cm balanced dome-type × 24 |
Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm, conductor cross section: 1.25 m㎡, 4-core cable, 3 m |
Operating Temperature | -10 ℃ to +50 ℃ |
Water Protection | IPX4 |
Finish | Enclosure: Plywood, white, urethane coating Front grille: Punched stainless steel, white, paint |
Dimensions | 160 (W) × 895 (H) × 255 (D) mm (excluding connected cable) |
Weight | 16 kg |
Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 |
Option | Matching transformer: MT-S0601, Extension plate: SR-EP4WP, Wall mounting bracket: SR-WB4WP, Wall tilt bracket: SR-TB4WP, Protection pad: SR-PP4, Digital speaker processor: DP-SP3 |