Overview
MM-2D-X 2-Channel Mic/Line Input/Output Dante Converter with Built-In DSP Mixer
Built-in DSP 2 mic/line input / 2 line output Dante converter to respond to various needs of contractor market and professional audio scene.
The MM-2D-X is a compact converter that converts 2-channel mic/line input/output signals into Dante signals. With half the size of a standard 1U rack, the MM-2D-X is suitable for different Dante systems as an exquisite analog output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. MM-2D-X supports up to 96kHz/24bit and uses XLR connectors for analog mic/line input/output.
Features
- 2-channel mic/line input with phantom power (+48v) support (XLR)
- Supports remote mic gain control
- 2 line output
- 4 Dante input/output
- Supports PoE (Power over Ethernet)
- Up to 24bit/96kHz
- Includes a variety of DSP functions for optimal use in different scenes/environments (Output effects, 6 in/4 out matrix mixer)
- Supports Dante daisy chain; this allows two Dante Compact Processor models to be connected without a network switch
- Flexible scene preset function allows to work in different area situations (Up to 50 presets)
- 2 types of user control software available for Windows/Mac/iOS/Android devices:
- For full control: input/output routing selection, DSP/design/scene settings of the complete system, etc.
- For simple control: simple app design for only the necessary functions such as area volume settings, etc.
- Remote control via Dante
- Half-rack mountable size
- Equipped with indicators that show LAN/Dante connection status and sample rate
- Equipped with signal indicators that monitor line input/output signals
- Configurable reference level (via remote control only)
- Surface rack mountable angles for installation under desks included
- Optional accessories:
- AC adapter PS-P1220E for redundant power supply available
- Rack-mountable shelf AK-RS1 to install and store two Dante Compact Processor models in a 19 inch rack case
Specifications
| General | |
| Formats and channels | 44.1/48/88.2/96kHz,16/24-bit, 2 channels |
| Input/output ratings | |
| DATA/DATA+PoE connectors | |
| Connector | RJ-45 |
| Transmission protocol | Dante |
| Gigabit Ethernet standard | 1000BASE-T (IEEE 802.3ab) |
| Cables | category 5e or faster STP cables |
| ANALOG IN connectors | |
| Connector | XLR-3-31 (1: GND, 2: HOT, 3: COLD) |
| Minimun input level | -74 dBu |
| Maximum input level | +26 dBu |
| Input impedance | 2.0 kΩ or higher |
| ANALOG OUT connectors | |
| Connector | XLR-3-32 (1: GND, 2: HOT, 3: COLD) |
| Nominal output levels | +4 dBu (when Ref. Level not -9 dBFS) +6 dBu (when Ref. Level set to -9 dBFS) |
| Maximum output level (switchable) | +15 dBu (Ref. Level: -9 dBFS) +18 dBu (Ref. Level: -14 dBFS) +20 dBu (Ref. Level: -16 dBFS) +22 dBu (Ref. Level: -18 dBFS) +24 dBu (Ref. Level: -20 dBFS) |
| Output impedance | 200 Ω or lower |
| Other | |
| Power | PoE class 0 TASCAM PS-P1220E AC adapter (sold separately) |
| Power consumption | 6W |
| Dimensions | 214 x 44.45 x 136.1 mm (W x H x D, including protrusions) |
| Weight | 878 g |
| Operating temperature range | 0°C-40°C |
| Included items | Installation brackets, Owner's manual (including warranty) |
Audio performance
| MIC IN → DANTE OUT | |
| Mic amp EIN (equivalent input noise) | -125 dBu (150Ω, 22kHz LPF+A, JEITA) |
| Frequency response | +/-0.5 dB: 20 Hz - 20 kHz(44.1/48kHz sampling frequency, JEITA) +/-0.5 dB: 20 Hz - 40 kHz(88.2/96kHz sampling frequency, JEITA) |
| Distortion (THD+N) | 0.005 %(when -1 dBFS input, 44.1/48/88.2/96kHz samplingfrequency, JEITA) |
| S/N ratio | 105 dB (44.1/48/88.2/96kHz sampling frequency, JEITA) |
| Crosstalk | 100 dB (44.1/48/88.2/96kHz sampling frequency, JEITA) |
| Dynamic range | 105 dB (44.1/48/88.2/96kHz sampling frequency, JEITA) |
| DANTE IN → LINE OUT | |
| Frequency response | +/-0.5 dB: 20 Hz - 20 kHz(44.1/48kHz sampling frequency, JEITA) +/-0.5 dB: 20 Hz - 40 kHz(88.2/96kHz sampling frequency, JEITA) |
| Distortion (THD+N) | 0.005 %(when -1 dBFS input, 44.1/48/88.2/96kHz samplingfrequency, JEITA) |
| S/N ratio | 105 dB (44.1/48/88.2/96kHz sampling frequency, JEITA) |
| Crosstalk | 100 dB (44.1/48/88.2/96kHz sampling frequency, JEITA) |
| Dynamic range | 105 dB (44.1/48/88.2/96kHz sampling frequency, JEITA) |
