Overview
CMS 3.0 CMS 603ICT PI
The CMS 603ICT PI is a wide bandwidth 240-Watt high sensitivity loudspeaker that utilises our third generation Ceiling Monitor System technology (CMS 3.0). Thanks to an all-new proprietary 6" ICT (Inductive Coupling Technology) point source driver with extended frequency range, the UL certified CMS 603ICT PI delivers consistent broadband directivity with enhanced intelligibility. ICT drivers provide exceptional long-term reliability – and are ideal for constant-usage applications.
Optimised for Installation
Specifically designed with a self-aligning 4 way clamp system for fast, simple and cost effective installation, CMS 603ICT PI also features extra clamp extension to accommodate thicker ceiling panels, and a locking design that prevents over-tightening. A convenient front panel tap switch for controlling the 60 W transformer mounted in the optional CMS 603 PI BACKCAN, paintable powder coated steel mesh grille with dust protection, two tile support rails and one C-ring are all included. An Arco style grille, which conceals the entire unit for aesthetic purposes, back can, and plaster (mud) ring are available separately.
LAB GRUPPEN Ready
CMS 603ICT PI is finished in semi matt white and optimised for use with LAB GRUPPEN LUCIA amplifiers, which accommodate up to 8 CMS Series loudspeakers per channel.
Features
Full range ceiling loudspeaker for installation applications
60 Watts continuous, 240 Watts peak power
6" ICT (Inductive Coupling Technology) point source driver for extended frequency range
Pre-install version supplied without back can (available separately)
High durability design for constant heavy usage in demanding applications
UL 1480 certified for general signalling systems
UL 2043 certified for air-handling spaces
Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input
Low insertion loss 60 W line transformer with easily accessible tapping switch
Optimised for LAB GRUPPEN low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel
Semi matt white finish fits unobtrusively in any environment
Powder coated UV resistant perforated steel mesh grille with dust protection
Removable magnetic grille for custom painting
Optional ARCO designer grilles available for minimal architectural impact
Self-aligning 4 way clamp mounting system
Mounting C-ring and ceiling tile rails included
Specifications
Performance
| Frequency range (-10 dB) <sup>(1)</sup> | 46 Hz - 24 kHz |
| System sensitivity (1 W @ 1 m) <sup>(2)</sup> | 91 dB (1 W = 4 V for 16 Ohms) |
| Nominal Coverage Angle | 90 degrees conical |
| Coverage Angle (1 kHz to 6 kHz) | 92 degrees |
| Directivity Factor (Q) | 7.1 averaged 1 kHz to 6 kHz |
| Directivity Index (DI) | 7.9 averaged 1 kHz to 6 kHz |
| Power Handling (3) | |
| Recommended Amplifier Power | 120 W @ 16 Ohms |
| Nominal Impedance (Lo, Z) | 16 Ohms |
| Rated maximum SPL | |
| Transformer Taps (via front rotary switch) | |
| Crossover | 7 kHz inductively coupled |
Transducers
| Low Frequency | 165 mm (6.50") mineral loaded polypropylene |
| High Frequency | ICT aluminium dome |
Physical
| Enclosure | |
| Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
| CMS 603ICT LS | UL 1480 UUMW certification for Life Safety applications |
| Clamping Design | Security toggle clamp Min / Max clamping range 9.5 mm (0.37") / 60 mm (2.36") |
| Backcan Options | Separate backcan for pre-installation |
| Cable Entry Options | Cable clamp & squeeze connector for conduit up to 22 mm |
| Conduit Knockouts on PI Backcan | 3 Sets of horizontal positions 19 / 22 / 28 mm (0.75" / 0.87" / 1.10") |
| Connectors | Removable locking connector with screw terminals with “loop through” facility |
| Compliance | UL-1480, UL-2043, CE |
| Dimensions | |
| Hole cutout diameter (all models) | 253 mm (9.96") |
| Net Weight (ea) | |
| Included Accessories | C-Ring, tile-bridge kit, paint mask, cut-out template, grille |
| Optional Accessories | Plaster (mud) ring, Arco grille |
| Packed Quantity | 2 |
