Overview
CMS 3.0 CMS 603DC BM
The CMS 603DC BM is a full bandwidth 320-Watt high sensitivity loudspeaker that utilises our third generation Ceiling Monitor System technology (CMS 3.0). Thanks to an all-new proprietary 6" Dual Concentric point-source driver with Omnimagnet technology on a Torus Ogive Waveguide, the UL certified CMS 603DC BM delivers wide and consistent broadband directivity with enhanced intelligibility – plus highly accurate and linear response.
Optimised for Installation
Specifically designed with a 4 way self-aligning clamp system for fast, simple and cost effective installation, CMS 603DC BM features an acoustically enhanced zinc plated steel back can, and a removable locking screw terminal connector with loop-thru functionality. A low-insertion loss 60 W transformer with convenient front panel tap switching, paintable powder coated steel mesh grille with dust protection, two tile support rails and one C-ring are all included. An Arco style grille, which conceals the entire unit for aesthetic purposes, and plaster (mud) ring are available separately.
LAB GRUPPEN Ready
The CMS 603DC BM is finished in semi matt white and optimised for use with LAB GRUPPEN LUCIA amplifiers, which accommodate up to 8 CMS Series loudspeakers per channel.
Features
Full range ceiling loudspeaker for installation applications
80 Watts continuous, 320 Watts peak power
Next generation 6" Dual Concentric driver featuring Omnimagnet technology
Torus Ogive waveguide for improved high frequency response and directivity
Blind Mount version supplied with acoustically enhanced zinc plated steel back can
Integrated single unit construction for ease of installation
UL 1480 certified for general signalling systems
UL 2043 certified for air-handling spaces
Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input
Low insertion loss 60 W line transformer with easily accessible tapping switch
Optimised for LAB GRUPPEN low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel
Semi matt white finish fits unobtrusively in any environment
Powder coated UV resistant perforated steel mesh grille with dust protection
Removable magnetic grille for custom painting
Optional ARCO designer grilles available for minimal architectural impact
Self-aligning 4 way clamp mounting system
Mounting C-ring and ceiling tile rails included
Specifications
Performance
| Frequency response (-3 dB) (1) BM Backcan | 75 Hz - 30 kHz |
| Frequency range (-10 dB) (1) BM Backcan | 50 Hz - 30 kHz |
| Frequency range (-10 dB) (1) PI Backcan | 46 Hz - 30 kHz |
| System sensitivity (1 W @ 1 m) (2) | 91 dB (1 W = 4 V for 16 Ohms) |
| Nominal coverage angle | 90 degrees conical |
| Coverage angle (1 kHz to 6 kHz) | - |
| Directivity factor (Q) | - |
| Directivity index (DI) | - |
| Power handling (3) | |
| Average | 80 W |
| Programme | 160 W |
| Peak | 320 W |
| Recommended amplifi er power | 160 W @ 16 Ohms |
| Nominal impedance (Lo, Z) | 16 Ohms |
| Rated maximum SPL | |
| Average | 110 dB |
| Peak | 116 dB |
| Transformer taps (via front rotary switch) | |
| 70 V | 60 W (83 Ω) / 30 W (165 Ω) / |
| 100 V | 60 W (165 Ω) / 30 W (330 Ω) / |
| Crossover | - |
Transducers
| Dual concentric point source driver | 1 x 165 mm (6.5") Dual Concentric |
| Low frequency | 44 mm (1.75") voice coil, treated multi fi ber paper pulp cone |
| High frequency | 25 mm (1.00") PEI dome |
Physical
| Enclosure | |
| Backcan | Zinc plated steel |
| Baffle | Refl ex loaded UL 94V-0 rated ABS |
| Grille | Steel, with weather resistant coating |
| Safety features | Safety ring located at rear of enclosure for load bearing safety bond |
| CMS 603ICT LS | UL 1480 UUMW certifi cation for Life Safety applications |
| Clamping design | Security toggle clamp Min / Max clamping range 9.5 mm (0.37") / 60 mm (2.36") Recommended clamp torque: 1.5 Nm |
| Backcan options | |
| Blind mount (BM) | Complete with fi xed backcan |
| Pre install (PI) | Separate backcan for pre-installation |
| Cable entry options | Cable clamp & squeeze connector for conduit up to 22 mm |
| Conduit knockouts on PI Backcan | 3 Sets of horizontal positions 19 / 22 / 28 mm (0.75" / 0.87" / 1.10") |
| Connectors | Removable locking connector |
| Compliance | UL-1480, UL-2043, CE |
Physical
| Dimensions | |
| Bezel diameter | 274.0 mm (10.79") |
| BM model: Front of ceiling to rear of backcan | 255.8 mm (10.07") |
| BM model: Front of ceiling to top of safety loop | 273.3 mm (10.76") |
| PI model: Front of ceiling surface to rear of speaker unit | 100.7 mm (3.96") |
| PI model: Front of accessory backcan bezel to top of safety loop | 168.5 mm (6.60") |
| Hole cutout diameter (all models) | 253 mm (9.96") |
| Net weight (ea) | |
| CMS 603DC BM | 6.6 kg (14.6 lbs) |
| CMS 603DC PI | 3.8 kg (8.37 lbs) |
| CMS 603ICT BM | - |
| CMS 603ICT PI | - |
| PI Backcan | 3.7 kg (8.1 lbs) |
| Included accessories | C-Ring, tile-bridge kit, paint mask, cut-out template, grille |
| Optional accessories | Plaster (mud) ring, Arco grille |
| Packed quantity | 2 |
