Tannoy CMS 503ICT PI

Tannoy CMS 503ICT PI

Tannoy CMS 503ICT PI

Tannoy CMS 503ICT PI

5" Full Range Ceiling Loudspeaker with ICT Driver for Installation Applications (Pre-Install)

SKU: TAN-CMS503ICT-PI
MSRP: $169.00

Overview


CMS 3.0 CMS 503ICT PI

The CMS 503ICT PI is a wide bandwidth 200-Watt high sensitivity loudspeaker that utilises our third generation Ceiling Monitor System technology (CMS 3.0). Thanks to an all-new proprietary 5" ICT (Inductive Coupling Technology) point source driver with extended frequency range, the UL certified CMS 503ICT PI delivers consistent broadband directivity with enhanced intelligibility. ICT drivers provide exceptional long-term reliability – and are ideal for constant-usage applications.

Optimised for Installation

Specifically designed with a self-aligning 3 way clamp system for fast, simple and cost effective installation, CMS 503ICT PI also features extra clamp extension to accommodate thicker ceiling panels, and a locking design that prevents over-tightening. A low-insertion loss 30 W transformer with convenient front panel tap switching, paintable powder coated steel mesh grille with dust protection, two tile support rails and one C-ring are all included. An Arco style grille, which conceals the entire unit for aesthetic purposes, back can, and plaster (mud) ring are available separately.

LAB GRUPPEN Ready

The CMS 503DC PI is finished in semi matt white and optimised for use with LAB GRUPPEN LUCIA amplifiers, which accommodate up to 8 CMS Series loudspeakers per channel.


Features


  • Full range ceiling loudspeaker for installation applications

  • 50 Watts continuous, 200 Watts peak power

  • 5" ICT (Inductive Coupling Technology) point source driver for extended frequency range

  • Pre-install version supplied without back can (available separately)

  • High durability design for constant heavy usage in demanding applications

  • UL 1480 certified for general signalling systems

  • UL 2043 certified for air-handling spaces

  • Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input

  • Low insertion loss 30 W line transformer with easily accessible tapping switch

  • Optimised for Lab Gruppen low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel

  • Semi matt white finish fits unobtrusively in any environment

  • Powder coated UV resistant perforated steel mesh grille with dust protection

  • Removable magnetic grille for custom painting

  • Optional ARCO designer grilles available for minimal architectural impact

  • Self-aligning 3 way clamp mounting system

  • Mounting C-ring and ceiling tile rails included


Specifications


Performance

Frequency range (-10 dB) <sup>(1)</sup>

71 Hz - 24 kHz PI Backcan

System sensitivity (1 W @ 1 m) <sup>(2)</sup>

89 dB (1 W = 4 V for 16 Ohms)

Nominal Coverage Angle

90 degrees conical

Coverage Angle (1 kHz to 6 kHz)

105 degrees

Directivity Factor (Q)

5.6 averaged 1 kHz to 6 kHz

Directivity Index (DI)

7.0 averaged 1 kHz to 6 kHz

Power Handling <sup>(3)</sup>
Recommended Amplifier Power

100 W @ 16 Ohms

Nominal Impedance (Lo, Z)

16 Ohms

Rated maximum SPL
Transformer Taps (via front rotary switch)
Crossover

7 kHz inductively coupled

Transducers

Low Frequency

130 mm (5.00") mineral loaded polypropylene

High Frequency

ICT aluminium dome

Physical

Enclosure
Safety Features

Safety ring located at rear of enclosure for load bearing safety bond

Clamping Design

Security toggle clamp Min / Max clamping range 9.5 mm (0.37") / 60 mm (2.36")
Recommended clamp torque: 1.5 Nm

Backcan Options

Complete with fi xed backcan

Cable Entry Options

Cable clamp & squeeze connector for conduit up to 22 mm

Conduit Knockouts on PI Backcan

3 Sets of horizontal positions 19 / 22 / 28 mm (0.75" / 0.87" / 1.10")

Connectors

Removable locking connector with screw terminals with “loop through” facility

Compliance

UL-1480, UL-2043, CE

Dimensions
Hole cutout diameter (all models)

190 mm (7.48")

Net Weight (ea)

3.95 kg (8.70 lbs)

Included Accessories

C-Ring, tile-bridge kit, paint mask, cut-out template, grille

Optional Accessories

Plaster (mud) ring, Arco grille

Packed Quantity

2