Overview
CMS 3.0 CMS 503ICT LP
The CMS 503ICT LP is a full bandwidth 200-Watt high sensitivity loudspeaker that utilises our third generation Ceiling Monitor System technology (CMS 3.0). Thanks to an all-new proprietary 5" ICT (Inductive Coupling Technology) point source driver with extended frequency range, the UL certified CMS 503ICT LP delivers consistent broadband directivity with enhanced intelligibility. ICT drivers provide exceptional long-term reliability – and are ideal for constant-usage applications.
Optimised for Installation
Specifically designed with a 4 way self-aligning clamp system for fast, simple and cost effective installation, CMS 503ICT LP features an ultra-shallow back can for applications where cavity space is limited, and a removable locking screw terminal connector with loop-thru functionality. A low-insertion loss 30 W transformer with convenient front panel tap switching, paintable powder coated steel mesh grille with dust protection, two tile support rails and one C-ring are all included. An Arco style grille, which conceals the entire unit for aesthetic purposes, and plaster (mud) ring are available separately.
LAB GRUPPEN Ready
The CMS 503ICT LP is finished in semi matt white and optimised for use with LAB GRUPPEN LUCIA amplifiers, which accommodate up to 8 CMS Series loudspeakers per channel.
Features
Full range ceiling loudspeaker for installation applications
50 Watts continuous, 200 Watts peak power
5" ICT (Inductive Coupling Technology) point source driver for extended frequency range
Ultra-shallow depth profile for applications where cavity space is restricted
High durability design for constant heavy usage in demanding applications
UL 1480 certified for general signalling systems
UL 2043 certified for air-handling spaces
Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input
Low insertion loss 30 W line transformer with easily accessible tapping switch
Optimised for LAB GRUPPEN low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel
Semi matt white finish fits unobtrusively in any environment
Powder coated UV resistant perforated steel mesh grille with dust protection
Removable magnetic grille for custom painting
Optional ARCO designer grilles available for minimal architectural impact
Self-aligning 4 way clamp mounting system
Mounting C-ring and ceiling tile rails included
Specifications
Performance
Frequency response (-3 dB) <sup>(1)</sup> | 88 Hz - 50 kHz |
Frequency range (-10 dB) <sup>(1)</sup> | 77 Hz - 54 kHz |
System sensitivity (1 W @ 1 m) <sup>(2)</sup> | 89 dB (1 W = 4 V for 16 Ohms) |
Nominal Coverage Angle | 90 degrees conical |
Power Handling <sup>(3)</sup> | |
Average | 50 W |
Programme | 100 W |
Peak | 200 W |
Recommended Amplifier Power | 100 W @ 16 Ohms |
Nominal Impedance (Lo, Z) | 16 Ohms |
Rated maximum SPL | |
Average | 106 dB |
Peak | 112 dB |
Transformer Taps (via front rotary switch) | |
70 V | 30 W (165 O) / 15 W (330 O) / |
100 V | 30 W (330 O) / 15 W (660 O) / 7.5 W (1320 O) |
Transducers
Low Frequency | 1 x 130 mm (5.0") mineral loaded polypropylene |
High Frequency | ICT |
Physical
Enclosure | |
Backcan | Zinc plated steel |
Baffle | Reflex loaded UL 94V-0 rated ABS |
Grille | Steel, with weather resistant coating |
Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
Clamping Design | Security toggle clamp Min / Max clamping range 9.5 mm (0.37") / 60 mm (2.36") |
Cable Entry Options | Cable clamp & squeeze connector for conduit up to 22 mm |
Connectors | Removable locking connector with screw terminals with “loop through” facility |
Compliance | UL-1480, UL-2043, CE |
Dimensions | |
Bezel diameter | 274.0 mm (10.79") |
Front of ceiling to rear of backcan | 98.6 mm (3.88") |
Hole cutout diameter | 253.0 mm (9.96") |
Net Weight (ea) | 4.4 kg (9.70 lbs) |
Included Accessories | C-Ring, tile-bridge kit, paint mask, cut-out template, grille |
Optional Accessories | Plaster (mud) ring, Arco grille |
Packed Quantity | 2 |