Soundcraft RW5693SM

Soundcraft RW5693SM

Soundcraft RW5693SM

Soundcraft RW5693SM

GB4 40ch 40+4/4/2

SKU: SC-RW5693SM
MSRP: $5,364.00
MAP: $4,354.00

The Soundcraft GB4 console carries the GB30 Mic preamps and EQ designed by Graham Blyth for the company’s 30th anniversary.

The desks carry the high quality hallmark with which Soundcraft is synonymous with engineering and design as you’d expect from this high-end manufacturer. Careful attention has been given to the mechanical construction to ensure reliability under strenuous conditions with all input modules being constructed with individual vertically-mounted pcb’s fitted to the steel chassis front panel with individually-nutted potentiometers.

The GB Series also shares the stylish looks of the MH4 MH3 and LX7ii consoles continuing a strong family look and feel across the range.Available in frame sizes from 16 to 40 channels the GB4 is designed for installations such as churches and performance venues or for small touring sound systems. The dual-mode topology implemented to such success on the MH3 and MH4 desks allows the GB4 to be used on FOH or monitor duties with fader control of group or aux outputs.

Although largely conventional in layout the GB4 does have some unique mechanical features. The rugged steel chassis has a sloping rear connector panel so that it is easier to configure from the front of the desk while the integral power supply has a link option for an external back-up PSU.

Four mute groups allow several channels to be muted simultaneously while another unique facility is the limiter on a set of dedicated record outputs that makes it easier to create a stereo recording of the mix.

The console also features an output matrix with seven feeds to four outputs being fed from the group busses and main L R and C (mono) outputs.

The GB4 offers a comprehensive set of functions and facilities in a small and cost-effective footprint and delivers the high performance and reliability you would expect from a Soundcraft product.

Specifications

Total # Of Inputs 40 Total
Mic/Line Inputs 40 Line: 1/4" TRS Phone
40 Microphone: 3-pin XLR
Stereo Line Inputs 4 Stereo: L/R Paired 1/4" Phone Line & 3-pin XLR Microphone
In-Line Inputs/Returns No
AUX Sends 8 Aux Sends
AUX Returns 4 Stereo Returns
Inserts 1/4" TRS Phone - Mono Inputs, Main Output and Subgroup Outputs
BUS (Group) Outputs 4 Subgroups: Balanced 3-pin XLR
2 Trk Master I/O Mix L/R: Stereo Paired 3-pin XLR Balanced
ALT I/O ALT Stereo: L/R Stereo Paired 1/4" Output
Monitor Outputs Monitor: L/R Stereo Paired 1/4" TRS Phone
EQ Section High Filter: 13kHz, +/- 15dB, 2nd order shelving
Hi-Mid: 550Hz - 13khz, +/- 15dB, Q=1.5
Lo-Mid: 80Hz - 1.9kHz, +/- 15dB, Q=1.5
Low Filter: 80Hz, +/- 15dB, 2nd order shelving
Solo/Mute All Input Channels
Channel Level Control 100mm Faders
Trim/Gain Control Rotary Potentiometers
Phantom Power +48V Phantom individually switched
Metering Input Channels: Single tri-color 4-segment LED bar graph
Outputs: 7 tri-color 12-segment LED bar graphs, + Meter pod with 3 VU meters (L/R/C)
Frequency Response 20Hz to 20kHz <1dB
Dynamic Range not specified by manufacturer
Signal-to-Noise Ratio Measured RMS, 22Hz to 22kHz Bandwidth
-128dBu Mic E.I.N. @ unity gain, 150 ohms source impedance
<-82dBu Mix Output, 40 inputs routed to mix
<-83dBu Group & Center Outputs
<-80dBu Aux Outputs
<-89dBu Matrix Outputs
Total Harmonic Distortion (THD) <0.006%Mic sens. -30dBu, +20dBu at all outputs @ 1kHz
Power Supply Internal AC PSU - 85V, 270V AC, 50/60Hz universal input
Power Consumption
Less than 150W
Dimensions 59.96 x 9.23 x 25.83" (1523 x 235 x 656mm) (WxHxD)
Weight 81.6 lbs. (37 kg)
Packaging Info
Package Weight 103.5 lb
Box Dimensions (LxWxH) 65.0 x 31.0 x 12.0"