Overview
Absolute best sonic performance at all price points
• Designed using state-of-the-art computer modeling software to vastly improve magnetic field and suspension linearity for consistent sonic performance at any SPL for best-in-class performance
Latest high-tech driver and tweeter material technology
• Improved low frequency performance
• Improved driver cone materials
• Low diffraction woofer and tweeter design
• Pivoting tweeter for improved frequency response in off-axis installations
• Chambered tweeter design on all models
The chambered tweeter design does the following
• Lowers the resonance frequency of the tweeter
• Allows for a lower crossover frequency to the woofer
• Reduces the back pressure on the tweeter dome
• Reduces the distortion of the tweeter near the crossover frequency
Easier to install
• Easier to access Roto-Lock® screws
• Removed metal hang tabs
• One-piece paintable grille with peel and stick scrim cloth for easier painting
• Two piece toggle feet allows installation with double dry wall and thicker ceiling and wall materials
Specification
| Tweeter | 1" (25mm) cloth dome, ferrofluid-cooled, pivoting, in acoustic back chamber |
| Woofer | 4 1/2" (114mm) textured polypropylene cone with a rubber surround |
| Frequency Response | 60Hz - 20kHz ±3dB |
| Impedance | 8 ohms nominal; 6 ohms minimum |
| Power Handling | 5 watts minimum; 70 watts maximum |
| Sensitivity | 89dB SPL (2.83V/1 meter) |
Dimensions
| Width: | 5 9/16” (142mm) |
| Height: | 8 7/8” (225mm) |
| Depth: | 3” (76mm) |
| Cut Out Width: | 4 5/8” (117mm) |
| Cut Out Height: | 8” (203mm) |
| Grille Material: | Perforated Steel |
Features
• 1" (25mm) cloth dome, ferrofluid-cooled, pivoting Tweeter
• 4 1/2" (114mm) textured polypropylene cone Woofer
• Slimline Magnetic Grill (Paintable)
• Limited Lifetime Warranty!
