Overview

The PS-S210SUBT utilizes all-new 2 x 10” (254mm) low profile, high excursion drivers, that were specifically engineered in-house by Sonance for this product. The polyurethane-coated, laminated-plywood enclosure features an extremely shallow design which allows it to be used in a wide range of specialty applications such as under restaurant booths or banquettes (using the included feet), or mounted onto the side of rafters, on walls or under ceilings (with the optional C-bracket).

One of the most unique and versatile features of the PS-S210SUBT is the ability to port either from the front or the side of the enclosure. The installer simply unscrews the port from the front of the cabinet, and then unscrews a blanking plate from the side, and swaps them. This will allow the product to be used in a variety of installation locations, while always ensuring the optimum sonic performance is achieved. The PS-S210SUBT features Sonance’s Laminated Core Technology transformer (SLCT), delivering full-fidelity performance in either 70V or 100V mode. This, combined with the built-in low pass filter, allows the subwoofer to be driven on the same feed as the other full-range loudspeakers in a system, negating the need for additional amplifier channels and DSP.

Features

• PS-S210SUBT features dual 10” drivers in a band pass design to deliver excellent bass augmentation at any volume
• Low profile dual 10" subwoofer form-factor to go under banquets, booths, furniture with supplied feet
• Optional C-Bracket for mounting on rafters, walls or ceilings for mounted subwoofer, or in-ceiling, pendant, or surface mounted for woofer options
• Port can be moved from front to side, ensuring optimum sonic performance in any location
• Sonance Laminated Core Transformer (SLCT) for full-fidelity performance in 70V/100V
• Built-in low pass filter allows the product to run on the same amplifier channel as other speakers
• Removable grille to keep enclosure free of foreign objects
• Side connector cover with cable management for enhanced reliability

Specifications

• Frequency Range (-10dB): 34Hz - 155Hz
• Frequency Range (-3dB): 44Hz - 132 Hz
• Power Capacity: 500 Watts Continuous Program Power | 300 Watts Pink Noise
• Nominal Sensitivity: 94dB
• Nominal Coverage: 180 degrees conical coverage
• Directivity Factor (Q): N/A
• Directivity DI: N/A
• Rated Maximum SPL: 121dB @ 1 meter (3.3 feet), 127dB peak
• Rated Impedance: 4 Ohms nominal, 3.7 Ohms minimum
• Transformer Taps: 300W, 150W, (75W 70V)
• Crossover Point: 150Hz
• Overall Dimension: 9" Height x 33" Width x 13.78" Depth (228mmx 838mm x 350mm)
• Net Weight: 61 lbs (27.7kgs)
• Shipping Weight: 75.8lbs (33 kgs)
• Unit of Measure: Each
• LF Driver: Dual 10" (254mm) woven glass fiber cones with Butyl rubber surrounds
• Input Connector: Four pin, Euroblock with loop output connections
• Safety Agency: None
• Suspension Points: 4 x M10 on two sides
• Cabinet: Laminated plywood
• Optional Accessory: C-Bracket with 4 x M10 mounting bolts