Overview
The 3i-221710WMC iSeries 2217-10 2U Wireless Mic Fly Rack expands on our popular Fly Rack series, allowing for transport of both rack equipment and wireless transmitters all in the same case.
This wireless microphone fly rack features a 2 RU injection molded rack frame with space below for four wireless hand held transmitters and four body pack transmitters, with additional space for smaller accessories.
This is an excellent solution for broadcasters and touring groups. SKB's injection molded rack frames are manufactured alongside our iSeries cases in Orange, California. Rack frames are removable and fit easily into SKB's iSeries cases, where they are protected by high quality PE foam that provides space for protruding knobs and buttons. At less than half the weight of standard shock racks, SKB Fly Racks feature iSeries Watertight injection molded cases that are under 62 linear inches to keep from being oversized, the perfect solution for flying or shipping delicate equipment. Convenient in-line wheels and a push button release pull handle provide easy transport.
This case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit www.travelsentry.org.
Prop65 Information
This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer and birth defects or other reproductive harm. To understand why we must make this statement please click on the Prop 65 tab above. For more information on Prop 65, go to www.P65Warnings.ca.gov.
Features
- 2U removable injection molded shock rack cage
- 13 inch rack depth
- Custom-cut foam to accommodate four wireless hand held transmitters and four body pack transmitters<additional space for smaller accessories
- Interior foam protection
- Ultra high-strength polypropylene copolymer resin case construction
- UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
- Automatic ambient pressure equalization value (MIL-STD-648C & IP67
- Molded-in hinges
- This case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit www.travelsentry.org
- Rubber over-molded cushion grip handles
- Locking loops to accommodate a customer supplied lock
Specifications
Exterior : Hard :
Built In Wheels or Casters : Yes :
Rack Units : 2 :
Rail To Rail : 12.75 in : 32.38 cm
Front Wall To Rail : 2 in : 5.08 cm
Right Wall To Rail : 1.375 in : 3.49 cm
Left Wall To Rail : 1.375 in : 3.49 cm
Back Wall To Rail : 2 in : 5.08 cm
Acc Slot Length : 5.5 in : 13.97 cm
Acc Slot Width : 4.5 in : 11.43 cm
Acc Slot Height : 2.5 in : 6.35 cm
Product Weight : 26.34 lb : 11.95 kg
Exterior Length : 24.52 in : 62.28 cm
Exterior Width : 19.5 in : 49.53 cm
Exterior Height : 12.22 in : 31.04 cm
Carton Length : 25.5 in : 64.77 cm
Carton Width : 20 in : 50.80 cm
Carton Height : 13 in : 33.02 cm
Shipping Weight : 28.65 lb : 12.99 kg
