SKB Cases 3I-1711-R5C

SKB Cases 3I-1711-R5C

SKB Cases 3I-1711-R5C

SKB Cases 3I-1711-R5C

iSeries for Canon R5 C Mirrorless Cinema Camera and Accessories

SKU: SKB-3I-1711-R5C
MAP: $224.99

Overview

The iSeries 3i-1711-R5C features a custom, high-quality foam interior that’s form cut to accommodate the Canon R5C Cinema Camera with additional pockets for two LP-E6NH batteries, LC-E6 battery charger, RF24-70mm f/2.8 L IS USM lens, Tascam CA-XLR2d-C Mic Adapter, and large accessory pocket. The accessory pocket measures 10.375” x 4.25” x 4” and is perfect for the power supply, an additional lens, cables, or other accessories. The lens slot was designed around the Canon RF24-70mm f/2.8 L IS USM lens, but can fit other similar-sized lenses such as the Canon RF24-105mm. The lens cutout is 6.25” long. The width is 2.75” near the lens mount, 3.5” for the body of the lens and 4.125” for the lens hood section. The depth is 3.5” in the body of the lens and 3.75” where the lens hood goes on the lens reversed.

SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).

Prop65 Information

This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer and birth defects or other reproductive harm. To understand why we must make this statement please click on the Prop 65 tab above. For more information on Prop 65, go to www.P65Warnings.ca.gov.

Features

  • Fits the Canon R5C Cinema Camera and accessories
  • Room for two Lp-E6NH batteries, LC-E6 battery charger, RF24-70mm f/2.8 L IS USM lens, and Tascam CA-XLR2d-C mic adapter
  • Accessory pocket measures 10.375" x 4.25" x 4"
  • Unconditional Lifetime Warranty
  • Molded of ultra high-strength polypropylene copolymer resin
  • Resistant to UV, solvents, corrosion, fungus, and impact damage (MIL-STD 810H)
  • Waterproof with complete gasket seal
  • Automatic ambient pressure equalization valve (MIL-STD 810H)
  • Molded-in hinge
  • Rubber over-molded cushion grip handle
  • Locking loops for customer supplied lock
  • Patented Trigger Latch® System

Specifications

Exterior : Hard :

Product Weight : 7.2 lb : 3.27 kg

Exterior Length : 18.25 in : 46.36 cm

Exterior Width : 14 in : 35.56 cm

Exterior Height : 7 in : 17.78 cm

Carton Length : 18.5 in : 46.99 cm

Carton Width : 14.5 in : 36.83 cm

Carton Height : 7.5 in : 19.05 cm

Shipping Weight : 8.2 lb : 3.72 kg